High Speed Automatic Production Line For Lug Caps / Twist-off Caps

NCP-008A Full automatic NC Punch
(60T press with double-end dies)

Technical Parameter:
Particularly designed to produce can caps and drawing cans, Automatic feeding and forming line under NC feeder (Dia. 1),formed by NC table, automatic punch, automatic feeding,and conveyor belt
(consequent processes such as edge grinder, second stretcher, trimming,cutter, waste discharger, etc.).
(1).NC table
Max. speed of arm and clamp:36m/min
Feed precision: ±0.1mm
Rated power: 2KW ,380V 50HZ
Dimensions:(L×W×H) mm:(NC unit),1740×2340×1045mm
Weight (NC unit): 1200kg
(2). Feeder
Applicable max specs of metal
plates :Width<950mm.
Length :<950mm
Max. weight of material: 3000kg
Max. height of material: >500mm
Lifting speed: 1.35m/min

Feeding speed: 12m/min
Power of complete set: 0.85KW
Dimensions (L×W×H):2900×2000×1650mm
Weight of complete set: ~600kg
(3).60T press
Nominal pressure:600K.N
Slide stroke:90mm
Frequency of slide storke:90 times/min
Power:5.5KW
Dimensions:(L×W×H)(mm):2650*1200*2570
Weight:7300Kg

2A8B twist-off cap making &injecting 

machine
(including injecting pump)

Technical Parameter
1). Cap dimensions (mm)
3-jaw,4-jaw and 6-jaw:Φ30~Φ82
2). Capacity: 150-180caps /min by means of frequency modulation
3).Dimensions(L×W×H)(mm):1580×1280×2300mm
4). Power:7.75Kw
5)Weight: 2500Kg

This machine is applied for die forming of twist-off caps, and injecting. The
rough twist-off caps with vertical rim are punched by press,then pre-curved,
forming,injecting and transferred to the drying oven.

  ENP100A drying machine

Technical Parameter:
Heating power: 28KW
Transfer power: 750W
Fan power: 1.5KW×2
Max temperature: 280℃
Size of drying tunnel : 3600×940×100mm,(L×W×H)
Dimensions: 6000×1270×2800mm, (L×W×H)
Weight: 1500kg

This machine is applied for drying of PVC sol,etc injected into caps

  CTE150 counter

Technical Parameter:
1. Model:CTE150
2.Speed of conveyor belt: 25m/min
3.Width of conveyor belt: 300mm
4.Counting speed: 700 caps /min,(Φ66mm bottle caps or round caps)
5.Bottle cap size:Φ30~Φ150mm
6.Motor power: 0.25KW 220V/380V,50HZ, 1390r/min.,coupled with

gearbox,NMRV040-1:10
7.Cylinder working pressure: 0.1 ~0.8MPa (MAL20×75-1, MAL16×15-1)
8.Outline size: 1750×500×1120mm
9.Weight: approx. 180KG.

This machine is applied for counting the finished caps.

  Conveying line

  Test transmission

This device is applied for test transmission of caps