PC general twin-wall 3-wall 4-wall plastic roofing sheet

Sunhouse polycarbonate hollow sheet is made of polycarbonate resin imported from Germany. It is the most popular material for construction and decoration.  The transmission of sun panel is from 35-80% with double anti-UV protection.  The hollow structure enhances the effect of heat insulation and sound insulation and makes it lighter to transport and install. Besides the characteristics of general hollow sheet, the crystal sun panel has better performance for the appearance and durability.

Technical Data

Foshan Sunhouse Building Materials Co., Ltd specializes in manufacturing roofing materials. Our Products satisfy various requirements of roofing materials from different customers, nonopaque and opaque, flat sheet and corrugated sheet, thermoforming secondary operations and etc. Our products are: PC (Polycarbonate) solid sheet, hollow sheet (sun panel), corrugated sheet and thermoforming products, PS(polystyrene) sheet, PVC (polyvinyl chloride) corrugated sheet, FRP light sheet, and polycarbonate awning. We have service of design, customizing, ODM, OEM, accept customers' materials for processing, which will make our products most suitable for customers. 

Our company is established in 1997 when we had only two lines for thermoforming. Now we have two mills including over 10 production lines. We can produce 50 tons per day and we have most kinds of products in the same work. Our products are popular in lighting of roofing, greenhouse, sound insulation, advertisement light box, telephone booth, bus shelter, housing balcony, machine protection and etc. Furthermore, we have advanced quality control system and estimate system. And we have the ability to research and develop advanced equipments and products. 

Our products have a nationwide selling network and are sold to Southeast Asia, Europe, Middle East and Africa. We hope we can explore more foreign market with our advanced technology, steady quality, favorable service and well-deserved reputation. We are looking forward to cooperate with more customers of building materials, advertisement equipments, outdoor articles and etc.   

How to install?

Step 1 – Use screws to attach the base connecting profiles to the roof beams. Make sure that screws do not bend, tear or exert excessive pressure on the profile.

Step 2 – Place the sheet on top of the base profile support edges, with the side covered by the printed protective film facing upwards.

Step 3 – Slide the base under the sheet and attach it to the beam.

Step 4 – Place the side spacer profile onto the roof beam and attach the cap to the base by hammering into place with a rubber mallet.

Steps 5 to 7 – Continue adding sequentially, a sheet (step 5),
a base connecting profile (step 6) and a cap (step 7) until reaching the end of the building. After completing installation, remove all the printed protective film from the sheets.

How to cut to size?

SUNHOUSE polycarbonate sheet can be cut with a fine tooth circular saw or hand saw held at a shallow angle. Dust must be removed from the sheet using a vacuum cleaner or dry compressed air. It is necessary to support the sheet close to the cut and to hold it firmly to prevent stress and vibration.