Ireland climate special design zero maintenance ultra-thin electric convection heater

Ireland climate special design zero maintenance ultra-thin electric convection heater

Brief description of electric convection heater

The Eco Art electric convection heater  are suitable for replacing old outdated oil or gas heating or simply adding a very efficient heating and control system to your home, office, school, holiday home, student accommodation and much more.

The Eco Art range of electric convection heater are manufactured using the latest in thermal technologies combined with electronic thermostats for accurate control of your heating. High thermal mica heating elements are used as the heating source in each radiator. The radiators are made from injected Aluminum which conducts and transfers the heat from the kaolin / ceramic heating tablets onto every surface of the radiator. The design of the electric convection heater quickly transfers this heat into the room. A built in LCD electronic thermostat then regulates the amount of energy that is required to maintain the temperature set by the customer. The result is a warm cosy radiant heat with full control to the level you desire. 

Details of electric convection heaters

How to know what size of electric convection heater?

* For any north facing rooms increase your result by 25% to avoid under estimating heat load required. ** It is very important that you not under estimate the heat load required and that the correct radiator is chosen for the size of room. Always choose the larger wattage (power) radiator that is nearest to your calculation.

Please use our simple heating calculator to assist you. Sizing the correct ELECTRIC CONVECTION HEATER radiator(s) requires measuring the total area of the room or rooms in question. Using the map, multiply your result by the factor given on the map for your region to get the heat requirement in Watts.

Example 1: For someone living in Armagh with a room measuring 5 metres wide by 3 metres in length the total area is 15m2.From the map below the factor is 105. = 15m2 x 105= 1,575 Watts. Therefore the ES–180DB 1,800W ELECTRIC CONVECTION HEATER is required.

Example 2: For a large room in Dublin measuring 7 metres wide by 6 metres in length, the total area is 42m2. Again from the map, the factor for this region is 100. = 42m2 x 100 = 4,200 Watts. Now we must select a number of radiators to sufficiently heat the room. 3 x ES-150DB 1,500W ELECTRIC CONVECTION HEATER = 4,500 Watts.