direct factory uv gel manufacturers with reasonable price

direct factory uv gel manufacturers with reasonable price 

PRODUCT DESCRIPTION

uv gel manufacturers is a general purpose cyanoacrylate adhesive that provides a fast, strong and permanent bond to almost all non-porous surfaces.

uv gel manufacturers is designed to bond most metals, plastics, elastomers and will bond ceramics, wood and textiles among others.

uv gel manufacturers cures times vary according to the materials, but most combinations are very fast, fixing in 2~8 seconds.

FEATURES

Bonds in seconds—therefore faster production on assembly line

Excellent bond for a variety of surfaces

Ready to use product, no mixing required

Adequate chemical resistance

Small area is sufficient to get strong bond

Solvent-less adhesive

Bonds plastic, metals and rubbers, china and dissimilar substrates

TECHNICAL DATA

As Supplied – tested at 23 °C ±2 °C , RH50%±5%:

As Supplied – tested at 23 °C ±2 °C , RH 50%±5% :

APPLICATIONS

uv gel bulk is the most common super glue in use, it can work best on hard plastics, metal, rubber, glass, ceramic, china, fabric, leather, vinyl and wood.

uv gel bulk is ideal for fixing precious and semi-precious stones in jeweler. Useful for repairs of domestic electrical appliances like mixture, grinders, irons, etc.

uv gel bulk is also used widely in the electronics industry and the white goods industry.

APPLICATION LIMITS

light cure resin is not suitable for adapting to structural fitting and following situations:

1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;

2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures belo w 5°C;

3. Use in the manufacturer of IG units;

4. To the painted surfaces, may cause seal failure as the paint cracking or stripping;

5. To the surfaces that with direct touch of food.

6. Do not use for structural glazing.

7. Not recommended for continuous water immersion applications.

8. Not recommended for use in below ground joints or trafficable

9. Joints where abrasion and physical abuse are encountered.

10. Not recommended for  some plastics such as polyethylene or polypropylene plastics.

HOW TO USE light cure resin 

Surface must be clean, dry and free from grease and old glue.

Mask smooth surface to simplify clean up.

Apply to one surface only.

Apply suitable pressure on bonding substrates.

Clean off excess adhesive with acetone.

Working Corner

light cure resinSHELF LIFE

12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 25°C.

Worldwide Exhibition

ZHENGZHOU HANDINHAND GLUE CO., LTD

Tel.:86-371-66888880

Fax:86-371-69112502

M:+86-15638412227  

Add.:Ninggu Industrial Zone, Zhengzhou City, Henan Pro, China

Zip:450000

Country / Regin : China ( Mainland )

Province / State : Henan

City : Zhengzhou

Skype:sls502glue

You can contact us by Email , Skype , Trademanager , Telephone or Mobilephone and etc.