Environmental Protection Equipment Strip Descaline Shot Blasting Machine

3XQ6914X series wide-strip blasting descaling machine
Mainly is：Access platform (upper platform, the lower platform 1 set) 1 set, shot blasting chamber (including lining shield) 3 sets, blow pill chamber 3 sets (including intermediate purge chamber liner sheeting, eventually purged each room sets a), shot blasting assembly 12 sets (including motor and transmission), the bottom of the screw conveyor 3 sets of roller conveyor 1 set, projectile control system 1 set (containing 12 pellets inlet valve and remote control system), bucket elevator 3 sets, pill residue separator 3 sets (including the upper part of the screw conveyor, pellets separators, storage hopper, screw conveyor and other waste), projectile compensation system 1 set, 3 sets of ventilation and dust removal system ( including inertial dust collector, bag filter, fans, motors, pipes, butterfly valves, chimneys, etc.), and the fan blowing pill pipeline (including 3 sets 3HE-200 blower and pipes), pneumatic control system, electrical control system.（See Figure equipment Total：3XQ6916X.0）.Specifically described as follows：

1.Blasting chamber housing (3 sets)
Blasting Room shells 12 mm in thickness Q235A steel plate welded, lined with wear-resistant liner, with the necessary strengthening ribs and mounting blasting the floor, the bottom ZGMn13 wear grid and a switch with lock safety limit switches and control access door. Blasting chamber inlet seal with a rubber strip. Top security fence and shot up and down with a ladder.

2.Wear lining plates (3 sets)
Blasting Room pellets directly projectile region with high wear-resistant manganese steel (ZGMn13) steel and hardened with a special cap nut. (The thickness of the liner is oriented: 22mm, the upper portion of the liner: 16mm, bottom liner: 16mm, lining the side: 16mm).
Eat sweep chamber also resistant liner.

3.Intermediate purge chamber (2 sets)
Intermediate housing chamber purged with an 8 mm thick welded steel Q235A, lined with wear-resistant liner, bottom plate with the grid. It has a nozzle plate to the upper surface of the strip purge pellets, there is a safety lock switch and one safety limit switch control access door. Outlet purge chamber is sealed with a rubber strip. Top with a safety fence and up and down using ladders.
Blowing pill form using an air knife.

4.Final purge chamber (1 set)
Final purge chamber housing with an 8 mm thick welded steel Q235A, lined with wear-resistant liner, bottom plate with the grid. He overhaul a nozzle plate to the upper surface of the strip purge pellets, a sub-nozzle plate installed directly under the surface of the strip after the steering roller sweep with a safety lock switch and a safety limit switch control door. Outlet purge chamber external rubber seal. Top shot safety bar up and down with a ladder.
Blowing using an air knife form.

5.Blast wheel (12 sets)
Model: QSX105 * 500
Each includes blasting with wear protection lining throwing the first housing with 8 throwing the first blade, sub-pill round, orientation sets, throwing into pill tube head body. Throwing the first housing cover is provided with a safety lock for electrical machinery, bearing unit with permanent oil cup.
Wear parts comprising: a blade, sub-pill round, orientation sleeve, outer interlocking plate, the feeding tube, the disk drive within the housing all liner.

6.Pellets inlet valve (12)
Model: DK100S
With access doors, including the service door and storage hopper to the throwing head hose
The valve core using material: wear-resistant manganese steel.

7.Pellets inlet valve remote control unit (12 sets) Japan (SMC)
For regulating the supply of pellets to the blast wheels, each unit comprising an electric control cylinder, mounted on the inlet valve pellets on the remote control.

8.12sets
To accommodate two kinds of shot blasting mode different strip widths.

You can contact us for more information.