fully automatic chain link fence machine

                             Fully automatic chain link fence machine

Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place. 

Raw Material

The raw material can be low carbon steel , galvanised wire ,stainless steel wire, aluminum wire, copper plate ,pvc coated wire and so on.

Technical parameter 

Diameter of Wire Mesh opening size

Advantages:

1. It adopts the technique of single model and double helixand it can improve the work efficiency greatly.

2. Japan Mitsubishi PLC (Programmable Logic Controller)

3. French Schneider inverter

4. Chinese top servo motor(make the production more precise).

5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.

6. There is a controller cabinethanging and it can set the length of the wire mesh, once the weaving finish, it will stop.

7. An alarm devicehas been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.

8.Speed of die:500r/min

9.Output:120m*2/h

Functions of the machine

It is widely used in 

as fences for playground and gardens, highway, railway, airport, port, residence, etc.