Kafuter K-5902TW Strip Light White Electrical Silicone Sealant

Specifications

   Kafuter K-5902TW Strip Light White Electrical Silicone Sealant

Characteristics:

(1) One part, ketone-oxime RTV silicone encapsulant.

(2) Low viscosity, flowing liquid, can fill the small gap in the encapsulated components.

(3) Neutral, no corrosion, high-temp, strength and solvent tolerance, low shrinkage.

(4) Form a high transparent film after cured, excellent in aging, corona, leakage, and shaking resistance,  water and oil proof.

APPLICATION

Apply in LED SMT rigid bar lights, LED strip lights, LED printing screens, mini-electronic components, encapsulating and protecting of thin layer in modules and circuit boards.

PROPERTIES

 DIRECTIONS 

Preparation

Clean the surfaces by removing the rust, ash, and oil, etc.

 Application

Pierce the opening with the tip of the cap. Then inject the glue and coat on the clean surface evenly to let it nature flowing.

Cue Condition

Put the coated parts in air to room cure, after 24 hour, it can put into use.

Attention

1. The adhesives absorb moisture in air to cure, especially in the deep encapsulated parts, it need more time to get cure.

2. Please screw the nozzle tightly after usage to avoid curing inside in the tube, if some cured adhesives around the opening, just remove it, and use the uncured.

 PACKAGING

300ml/cartridge, 30cartridge/CTN 

STORAGE

Store in cool and dry place, the shelf life is 12 months (≤25°c)