Loudspeaker Kafuter Strong Acrylic Ab Glue Acrylic Adhesive

Specifications

Loudspeaker Kafuter Strong Acrylic Ab Glue Acrylic Adhesive                           

                            (Especially bonding the hard-plastics)

Main Characteristics:      

Two-part, strong strength, fast cure, can bond oil surface, and the layer form as solid as iron after curing a few minutes, can bond a variety of substrates, especially for bonding the hard-plastics.

Application:

 Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.

Technical Properties:

Packing Specifications:

 Directions:

1.The surface should be clean and dry.

2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with a large quantity at one time)

3.Coating the mixed adhesive on the preparing surfaces, the initial cure with 5~10 min at room temperature,  it can get work strength after 30 minutes.

4.This product can be used at any temperature between -60°c~200°c

 Attention:

1.Keep out of reach of children.

2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.

3.Store in dry and cool place, keep away from heating and fire.