DC/CC material 5052 H32 aluminum sheet

5052 Aluminum Alloy is a medium strength alloy containing Magnesium as its major alloying element. 5052 Aluminum alloy has good workability, a high fatigue strength and is very good for welding. It has very good corrosion resistance to seawater and the marine and industrial atmosphere

Chemical Composition

Cu 0.10
Si+Fe 0.45
Mn 0.10
Mg 2.2/2.8
Zn 0.10
Cr 0.15/0.35
Al Balance

This is a non-heat treatable alloy that is weldable. It is hardened by cold work. It has good forming characteristics and good corrosion resistance, including resistance to salt water.
This alloy has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining

Founded in 2003 Suzhou Southeast Aluminum Sheet Co., LTD. is a manufacturer of aluminum material located in Suzhou, Jiangsu Province.

Our company is mainly engaged in processing and sales of mill finish aluminum material, we have one 2050mm, one 1250mm and one 600mm cross- cutting lines, one 1250mm, one 600mm，one 2100mm, one 1450mm, one 460mm and one 650mm slitting lines, two set of film laminating. All of our machines make sure of the short delivery time with good and steady quality.

Our main products include 1xxx series, 3xxx series, 5xxx series, 6xxx series and 8 xxx series aluminum sheets, aluminum plates, aluminum coils, aluminum strips, aluminum foil and so on, thickness vary from 0.1mm to 20mm, width vary from 10mm to 2100mm. Our main market is Canada, Ukraine, Australia, Japan, Russia, Cuba, Bosnia, Thailand, Vietnam, Korea, Egypt , Nepal, India and worldwide.

Our company has passed international quality management system ISO 9001:2008 and International Environmental Management System ISO 14001:2004. All of our products are strictly based on aluminum quality standard GB/T 3008-2006 and also pass SGS and MSDS.

Insist on the principle of Create Value for Customer, we believe we will be one of your best partner.

Packing: Waterproof paper cover the surface,wood pallet. 1*20ft container can load 16-20 tons aluminum sheet.
(1) Standard seaworthy export packing, wooden pallets with plastic protection film for coils;
(2) The packing for the coil: eye to sky or eye to wall based on the client's requirement;
(3) Usually one 20 feet container can load about 16-20MT.

Typical applications include aircraft fuel/oil lines, fuel tanks, other transportation areas, sheet metal work, appliances and lighting, wire, and rivets.