Emulex LightPulse 8Gb Single-Port PCIe Fibre Channel Host Bus Adapter LPe12000

Specifications

LPe12000 Emulex LightPulse 8Gb Single-Port PCIe Fibre Channel Host Bus Adapter   

Product Descriptions

Standards

ANSI Fibre Channel:

FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
           PCI Express base spec 2.0
           PCI Express card electromechanical spec 2.0
           Fibre Channel class 2 and 3
           PHP hot plug-hot swap

Architecture

Single-channel
8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected
Integrated data buffer and code space memory

Comprehensive OS Support

Widws, Linux, NetWare, Solaris, VMware
Additional support is available from OEMs and partners

Hardware Environments

PowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor family

Optical

Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
Optics: Short wave lasers with LC type connector
Cable: Operating at 8Gb/s
       50/125 microns (500MHz*km BW)-up to 50m
       50/125 microns (2000MHz*km BW)-up to 150m

Physical Dimensions

Short, low profile MD2 form factor card
167.64mm x 68.91mm (6.60" x 2.71")
Standard bracket (low profile available)

Power & Environmental Requirements

Volts: +3.3, +12
Operating temperature: 0° to 55°C (32° to 131°F)
Storage temperature: -40° to 70°C (-40° to 158°F)
Relative humidity: 5% to 95% non-condensing
23 degree C wet bulb

Agency Approvals

Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
UL recognized to UL 60950-1
CUR recognized to CSA22.2, No. 60950-1-03
Baurt-certified to EN60950-1
FCC Rules, Part 15, Class A
ICES-003, Class A
EMC Directive 2004/108/EEC (CE Mark)
    EN55022, Class A
    EN55024
Australian EMC Framework (C-Tick Mark)
    AS/NZS CISPR22, Class A
VCCI (Japan), Class A
MIC (Korea), Class A
BSMI (Taiwan), Class A
EU RoHS Compliant (Directive 2002/95/EC)
China RoHS Compliant