clean room transfer window pass box

  clean room transfer window pass box  

Transfer window of cleanroom is mainly used for general auxiliary equipment, clean and unclean zone between the unclean and the clean areas or small items between area, in order to reduce the number of clean room opened the cleanroom, minimize the pollution.

In order to decrease due to the goods in and out of a lot of dust particles and air shower pass box after efficient filter clean air by rotating the nozzle from injection to the goods in all directions, effective and rapid removal of dust particles, removal of dust particles then by early and efficient filter loop back to the air shower area. In order to achieve the desired effect of the blowing pipe, the nozzle outlet wind speed can reach more than 20 s.

 Laboratory clean transfer window/ transfer box's peculiarity:

1.Using HEPA filter system

2.Fan: low vibration, low noise, imported or domestically fans

3.Subsidiary parts: Intercom, Ultraviolet sterilization lamp

4.Air shower pass box have dual function of a gate and lock , passed Items must be air showed after can enter cleanroom, so can effectively To prevent passed item be carried dust or bacteria into the clean room.

Laboratory clean transfer window/transfer box's main characters:

 1.The outer wall is high-quality SUS304 stainless steel 1.2 mm thick material.

2.The short distance transmission Windows work surface is made of stainless steel plate, flat is bright and clean wear-resisting.

3.Long-distance transmission Windows countertops use unpowered rollers, transfer items easily.

4.On both sides of the gate has a mechanical interlock or electrical interlock device, make sure not in an open position at the same time on both sides of the door.

5.The outlet of the wind speed up to more than 20 s.

6.Adopts hepa filter with separators, the filtration efficiency is: 99.99%, to ensure that the level of purification.

7.Using EVA sealing material, sealing performance is high.

8.Imported electronic components, reliable in performance.

 Packing:  standard packing suitable for sea transportation.

Shipping: within 20 days after receive the deposit

 Research and manufacture development is the purpose we always follow for years, and also enjoy providing customer-oriented services , in particular any ODM/OEM business.

When we begin to cooperation, we will provide the following services for you

1,Completely according to your request to production of goods for each one.

2,Report the production progress at any time, and send pictures to you to check.

3,Packing like picture. the packaging is solid and firm. Cartons will be printed on your company's information, can be done without any information of our company if you need.

4,Have corresponding label on each product of the packaging , it is easy to put and installation.

5,Documents provided accurately.

6,Follow up the shipping company information at any time, to remind the time of arrival.

7,After receiving the goods, we will send you the installation video or installation drawing, solve any problems for you at any time.

Welcome to visit !

Please feel free to contact us: