customer designed pharmaceutic pharmacology clean room system

clean room system  clean room    Low Price Pharma Clean Room Construction

Clean rank of suspended particles in air of clean room or clean area:

   sandwich panel clean room  clean room partitions Clean Room Construction

Clean room refers to a certain space range of micro particles in the air, harmful air pollutants such as bacteria, the excluded, and will indoor temperature, cleanliness, indoor pressure, air velocity and air distribution, noise, vibration and lighting, static control in a certain range, and the demand for special design of the room.

portable clean room
1. Ceiling system:  Include the ceiling rod,I-beam or B-beam,ceiling grid or ceiling frame.

sandwich panel clean room
2. Air conditioning system : Air cabin,air filter system,windmill.

clean room partitions
3. Partitional wall: Include window,door.

4.Floor: include the raised ventilation florr or static floor,epoxy self-leveling and rolling floor.

Clean Room Construction
5.Luminaire : include daylight lamp,yellow lamp tube.

  
6. The clean room construction main body structure: The general material is steel or bone  cement,but whatever what structure,which meeting the following conditions.
A. No cracking because of change of temperature and vibration.
B. It isn't easy to appear dust particles,and difficult to adhere to partical.
C. Hygroscopicity small  clean room design  
D. In order to maintain indoor humidity conditions,the heat insulation too high.   clean room project

portable clean room design

Pre-fabricated Laminar Air Flow Purification Operating Theatre Hospital Clean Rooms

Definition of cleanse:

Smear exists during processing or handling objects will affect the success rate, while controlling the smear on the processing object will increase the success rate. Technology of cleanse and tarnish control, usually called as tarnish control in international, is a technique to control such smears (also including treatment and isolation of harmful substances in the processing or handling objects).

Class 100 to Class 100,000 Clean Room ConstructionClean room filter

Air shower room !high performance!china supply!professional!hot!

Manipulation of clean air:

Air from outdoor is processed by early effect segment, mixed with indoor return air, and then filtrated by middle effect segment, high effect segment to clean room, to control the number of particles in the air below a certain number.     chemical room window

Air can also be manipulated by heating, cooling, humidification, dehumidification, sterilization and et al, to receive certain state like sterile, constant temperature and humidity.

According to the clean-level, indoor air can be organized in a manner laminar, turbulent flow and mixing.    Clean Booth

Aluminum profile used for clean room door

Clean possession of state:

Empty: Facilities have been completed, all connected to power supply and run, but no production equipment, materials and staff

Dynamic: Facilities have been completed, production equipment has been installed, operation under agree ment of business and vendors agree, but no staff.

Static: Facilities run under stated condition, the presence of stated person and work under promissory state.

HEPA Filtration for Pharmaceutical factory Clean Room

Recommend for rank of clean workshop of related industry:

(A)Cleanliness and the number of ventilation cycles. The cleanliness of the room depends upon the number of ventilation cycles performed per unit time. the structure should be contrived so that the air flow is distrubed as little as possible and due care should be taken to prevent the accumulation of dust on surfaces anywhere in the clean room. In order to maintain the cleanliness of the room, the inflow of contaminating particles from outsid must be prevented. To obtain the required room pressure, outside air of apprepriate quality and quantity is necessary.

(B)Material and anxiliary equipment for clean room Material is employed for the ceiling, walls and floor. when necessary, such auxiliary equipment as air showers in the entrances and pass-boxes in the walls must be installed.

(C)Control of personnel , materials Personnel and materials brought, are the main sources of dust in clean rooms, so adequate controls must be adopted. For example, all personnel should be made to pass through air showers and change into dust-free clothes before entering clean rooms.

(D)Other facilities

According to the work to be performed water supply and drainage facilities and eletricity and gas supplies may be necessary. There facilities and related equipment should be easy to use should be designed . Because Clean Room is completely closed, measures to take in case of emergencies such as a fire, a power failure, must be fully considered.

(E)The first decision you'll face is choosing between a manufacture modular cleanroom and a conventional construction cleanroom. A manufactured modular cleanroom is custom built at the vendor's factory and assembled at your facility, while a conventional construction cleanroom is built from the ground up at your site.

(F)To determine usage requirements, estimate how many people will work in the cleanroom and how often they will enter and exit. The size and amount of furniture and equipment must also be considered. These requirement will help you to determine the size of cleanroom you need.

 Client    cleanroom air shower,air shower clean room