150L-400L Split Pressurized Solar Water Heater system

150L-400L Split Pressurized Solar Water Heater system 

Feature:

1.It can operate under the high pressure and high temperature, and it has a very long life span.

2.The insulation layer of water tank consist of the high density polyurethane foam, the temperature can be protected for more than 72hours.

3.Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, with increased anode magnesium bar.

4.The anode bar to prevent furring, It is the true two in one. The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architecture.

5.It solves the problem of limited roof on the high building, and it has a large size volume which can provide the hot water for many people at the same time.

1.SUS304-2B food grade or crystalline material inner tank  
2.Galvanized steel materialouter tank:uP/T valve, Magnesium anode baruCopper material heat-exchanger,
3.High density polyurethane foam Insulation:
4. Electrical heater with thermostat  

1) This collector tube adopts magnetron sputtering coating technology

2)  Coating: Cu/Ss-Aln/Aln high efficient selective absorptive coating and vacuum heat insulation could get higher heat and have high performance of absorptance and low reflection ratio and performing a strong heating ability.

3)tube life: more than 15 years.

Our company is a manufacturer of  solar collectors and solar water heaters in China .We have ISO certification and some other related certifications.We always give our customers best price and good quality! We sincerely hope you will be my next business friends!