High Quality One Way Car Alarm

Specifications

One Way Car Alarm 2 transmitters  Blue LED

Specification

·Modules controlled by Micro-Processor

·2 transmitters with 4 button and Blue LED

·Learning 4 Transmitters (Codes)

·Transmitted frequency 433 MHz (Anti Scan)

·Panic by Transmitter

·Car Finder or Localization by transmitter

·Silent amed and disarmed by transmitter

·Silent amed and disarmed programmable

·Negative Output of Channel 2 (Open electric trunk)

·Negative Output of Channel 3 Optional modules (programmable))

·Disarmed the system to open the electrical trunk by transmitter(Channel 2)

·LED indicator of board

·1 positive output for Flash lights with internal module

·Negative Central locking

·Auto Armed (Programmable)

·Close the Electrical Safety with Auto Armed (Programmable)

·Open and Close the Electric Safety with Ignition (Programmable)

·Double Pulse to open the Electrical Safety

·Time of electrical safety programmable 0.8 second to 4 seconds.

·Auto rearmed (Accidental disarmed) (Programmable)

·Close security with Auto rearming (programmable)

·Impact Sensor with pre-warning excludable by transmitter

·Positive button line original (Ford, etc.).

·Negative button line original (GM, Toyota, etc..)

·Button line of trunk and bonnet (Negative)

·Electronic Siren of 120DB

·Valet mode ( by the reset button)

·Cables identified by colors

·Fuse protection incorporated into the harness installation

·Anti-asalto by transmitter (Programmable))

·Anti- asalto by Open Door (Optional)

·Special Anti-asalto by switch Ignition (Programmable)

·Anti-assault by Presence (Additional Transmitter) (Programmable)

·Warning Light When Anti-asalto

·Acoustic warning When Anti-asalto (Programmable)

·Negative Output with armed for the Short current

·Second Short Current (Programmable)

·Negative output timer for Rises Glass Modules (Programmable)

·Exclusion Zone defective

·Intermittent output for the horn (Programmable)

·Dome Light (programmable)

·Programming functions through software

·Disarmed by manual security PIN code (programmable)

·Memory of the last state of the system

Introduction:

We are grateful to have acquired the vehicle for our security system. Read the manual and use system main functions by transmitter, the valet switch and the LED indicator on the dashboard.