ASTM A213 T22 Seamless Alloy Tupe

ASTM A213 T22 Seamless Alloy Tube

ASTM A213 T9 Standard covers seamless ferritic and austenitic steel boiler, superheater,

and heat-exchanger tubes.

Specifications:

Outer Dimensions: 10mm – 114.3mm

Wall Thickness: 1mm – 20 mm

Length:  Fixed length, random length,  max 16000mm

Packing:

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Surface treatment:

Oil-dip, Varnish, Passivation, Phosphating.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

• A / N+T
• N+T / Q+T
• N+T

Mechanical Tests Specified

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Hardness Test:

• P11 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].

Notes for Bend Test:

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Company Profile

1. We can supply steel pipe , pipe fittings, flanges, steel sections and valve etc.

2. Our factory history begins in 1989, we have more than 20 years' exporting experience to serve you.

3. Our team is prefessional, we control the price and quality in good level.

4. Our products is Rich, not only from our own factories , but also we are agency of many factories in China, you can source from us in one time.

We believe “ Give us a chance , and you can get one more choice for yourself at the same time !”

Welcome to contact with us any time.

Product Scope

Our Customers

Company Culture