Newest full body 3D screen film for Iphone 4/4s

Specifications

Full body 3D screen protector for Iphone

Features: 

1) Made from high quality PET material imported from Korea and Japan

2). High-transparence reaches 90%,

4. UV protection, anti-scratch, dustproof and waterproof.

3)  It is rather suitable for iphone series

4) Guaranteed to last and not rub or fall off

5) Contrast enhancing, HC coating reaches 3H, rather thin, can be 0.12mm, smooth mold-cutting

6) Ultra durable, can be taken off, washed then reapplied

7) Will not change the overall appearance of the device, the device can be used unimpeded

 Instructions: 

1) 3layers PET materials, good touch sensitivity, three layers design will keep middle applied layer clean and easy to be applied.

2) Bubble free and fingerprint free.

3) Customized designed to fit your LCD Monitor Screen.

4) Quickly and easily adhere directly to the screen.

5) Silicone gel adhesive layer, there will be no sticky residue when taken off the protector.

Installation:

 1. Check the film size

Clean both hands and LCD screen, then adjust the location where the film would be on the LCD procedure. (Please arrange the film to the center of LCD before you take of all vinyl out of the hard film.)

 2. Clean LCD

Clean the LCD wih cleaner and micro fiber included in the package. If there is a dust left on the LCD, that can cause a bubble. Apply cleaner on the cloth, not on LCD.

 3. Film Installation

Take off 1/3 of back PET and begin to apply it on the area you desire on LCD. Take off the rest of back PET as your fully attach the film. Result may vary upon installation

 4. Remove buuble with a squeeze

Remove bubbles by squeeze included in the package with the film. If you see bubbles after installation, lift up with film with a tape and re-stick it or slide the bubble to the sides very slowly and carefully with a squeeze.