Dome IP camera for home automation

Simple configuration: Standard Web browser GUI can help users to control and manage the IP cameras through LAN or Internet. Video Watching and Video Record: Provide concise GUI for user to watch real-time video stream from anywhere networking connection is available. And the video segments can be recorded on your computer.
Alarm Monitoring: Through external alarm device, the alarm information can be sent to your e-box or your mobile phone.
Especially, user can activate motion detection function to detect any movement in the selected area. If any illegal invasion happens, alarm will be realized. Simultaneously, the captured images will be sent to email address specified by user. Support dynamic DNS: Support Dynamic DNS. Users can access his/her IP cameras easily through DDNS despite that the camera IP changes frequently.
Simple User Authority Management: Setting USER and PASSWORD of the system can help user to protect privacy effectively, meanwhile, users can be authorized with different permission levels to operate the IP camera. Real-time Monitor through Intelligent Mobile Phone: With the assistance of professional client software IP Cam Viewer, user can access any online IP Camera anywhere through intelligent mobile phone, iPhone or Android-OS(Operation System) based mobile phone and run routine PTZ operations. User can download IP Cam Viewer software from CD delivered in package box to your intelligent mobile phone. Please confirm your mobile phone has iPhone OS or Android-OS and choose the correct software version.

Installation
2.1 Hardware installation
1.Install network connection: 
Insert one crystal head of twisted pair cable into the cable slot of NIC(Network Interface Card), which locates on the back of IP camera. Then, connect the other crystal head of the cable to the router or switch.
Tips: The length of twisted pair cable should be less than 100 meters, otherwise, the communication will not be stable. If the connection distance exceeds 100 meters, switch relay is recommended.

2. Connect the power
Connect the IP camera with power slot through power cable distributed in the package box.
Cautions: Please use the original power adaptor distributed with the camera device, otherwise, it may cause hardware damage.
3. Check the network indicator light
When the camera works, normally the green indicator of the IP camera is on continuously and yellow light flashes.

Safety & maintenance instruction

-       Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.

-       Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.

-       Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.

-       Keep all parts away from young children’s reach.

-       Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.

-       Avoid dropping or shocks, this can damage the electronic boards.

-       Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.

-      Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.

Maintenance

The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.

NOTE

Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.

Warranty 1 year