Base film: PET

Coating layer: Nontoxic resin possible metallized AL combined pigment.

(1) Appropriate hot stamping foil, gluewater and technics ought to be chosen according to the different stamped material;

(2) Much attention must be paid to the good match of temperature, speed and available gluewater.

(1) NORMAL HOT STAMPING: above 180 °c high temperature ; Stamping speed: 15~40m/min; Heat Preservation: put the stamped material with foil into the glasshouse at 50~80°c, then seperate the foil from the stamped material after about 12 hours.

(2) SPECIAL HOT STAMPING: above 180 °c high temperature; Stamping Speed:20~50m/minutes, no need Heat Preservation.

(1) Hot stamping foil must be protected from pressure, moisture, heat and sunshine;

(2) Storage time: 1 year

Each roll wrapped by PE cotton & craft paper, Both ends locked with wooden baffle in a carton;

Net Weight: 85KG/carton, Gross Weight: 90KG/carton;

Carton Size: 1.53m*0.32m*0.32m=0.157CBM 

Each roll wrapped by PE cotton & craft paper, Both ends locked with wooden baffle in a carton;

Net Weight: 74KG/carton, Gross Weight: 78KG/roll;

Carton Size: 1.32m*0.32m*0.32m=0.135 CBM

Each roll wrapped by PE cotton & craft paper, Both ends locked with wooden baffle in a carton;

Net Weight: 68KG/carton, Gross Weight: 72Kg/carton;

Carton Size: 1.23m*0.32m*0.32m=0.126CBM