manufacturer: 3MM TORCH ON BITUMEN WATERPROOF MEMBRANES

     SBS/APP TORCH ON WATERPROOF MEMBRANES

The products are made by soaking the base in bitumen, or thermoplastic elastomer(Such as styrene butadiene-SBS),or thermoplastics(Such as atactic polypropylene-APP,APAO,APAL)modified bitumen, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APAL)modified bitumen, and last finishing the upward face with fine sands, mineral flakes(or Grains) or polythene membrane etc. while downward face with fine sands or polythene membrane.

Features

Good ability of anti-aging, anti-alkali, resistant to high temperature. High tensile strength and elongation, which adapts to the contraction or crack of the base

non-toxicity,odourless,non-pollution and good flexibility

Application:

1, Basement and roofing of key waterproof engineering , general and civil engineering . Such as planting roof, flat roof and sloping roof.

2, Bridge , grain depot, road, granary, tunnel, park ,swimming pool, sewage purifying pool landfill and others.

3, Especially adapting to the area with strong sunshine or high temperature.

Technical property:

Package and transportation:

Membranes should be stored under dry and ventilated conditions.

Different types of membranes must be piled separately.

Under usual condition, storage period is one year since production date.

Membrane roll should be put vertically during transportation. It should be kept away from sunshine and rainwater.

Requirements for surroundings:

The base should be dry and clean. Do not work in the rainy or snowy day.

Do not work under heavy wind(above 5 grade)

Unsuitable for construction below 0°C

If it is rain or snow in the process of construction, protective measure to the laid membrane is must.