art floating candle/custom floating candle/candles production line

Candles are perhaps one of the most enjoyable and affordable luxury items available to everyone. They are beautiful and magical, infusing the home with color and fragrance.  They can create a special warmth and ambiance to bring a special sense of calm and well-being.

Although modern technology has introduced greater efficiencies and quality control in candle-making, most candles are made through the timeless process of placing a cotton wick into wax, which is then molded, dipped, extruded, pressed, rolled, drawn or filled into a desired shape and size.

A candle consists primarily of wax and a wick. Candles may also contain colorants, fragrances and minor additives. The basic candle types are tapers, votives, pillars, jar or container candles, tealights, gels, floating candles, outdoor candles, novelty candles, utility candles, and birthday candles.

When you light a candle, the heat of the flame melts the wax near the wick. This melted or liquid wax is then drawn up into the wick by capillary action. The flame's heat vaporizes the liquid wax to produce water vapor and carbon dioxide (the same byproducts that humans produce when exhaling).

Unless a candle has defects that are obvious to the eye, you probably can't tell just by looking. That's why the National Candle Association strongly recommends that you purchase candles from a reputable manufacturer. 
 

The most commonly used candle wax is paraffin, soy wax, palm wax, gels, and synthetic waxes are also frequently used in candles. Different blends of these waxes are popular with many manufacturers.

No. All types of quality candle waxes have been shown to burn cleanly, safely and in the same manner..

Maximum burn times vary from candle to candle; follow the manufacturer's instructions. Always extinguish a candle if the flame gets too close to the candle holder or container. For a margin of safety, discontinue burning a candle when 2 inches of wax remains (½ inch if a container candle or jar candle). 

A well-made candle will create virtually no smoke when burning properly. However, if the wick becomes too long, or an air current disturbs the flame's teardrop shape, small amounts of unburned carbon particles (soot) will escape from the flame as a visible wisp of smoke. Any candle will soot if the flame is disturbed.

To avoid this, always trim the wick to ¼ inch before every use and be sure to place candles away from drafts, vents or air currents. If a candle continually flickers or smokes, it is not burning properly and should be extinguished. Allow the candle to cool, trim the wick, make sure the area is draft free, then re-light.  

No. The minuscule amount of soot produced by a candle is the natural byproduct of incomplete combustion. Candle soot is composed primarily of elemental carbon particles, and is similar to the soot given off by kitchen toasters and cooking oils. These everyday household sources of soot are not considered a health concern, and are chemically different from the soot formed by the burning of diesel fuel, coal, gasoline, etc.

Federal law requires that consumer commodities like candles be labeled with the manufacturer's name and location, as well as basic product weight and measurement information.

In addition, candle industry standards call for cautionary labels on candles or their packaging to inform consumers of the basic rules of fire-safety. . Always read and follow a candle's cautionary label and burning instructions before using a candle.

Not really. The oils found in certain fragrances may slightly increase the small amount of soot produced by a candle, but wick length and flame disturbance are the primary factors that impact sooting in a properly-formulated candle.

Yes. When a candle burns, the wax is drawn into the wick, where it is "consumed" by the candle flame to produce water vapor and carbon dioxide. The only difference with a scented candle is that a small amount of fragrance is released as well.

Reputable candle manufacturers use only fragrances that are approved for burning in candles. They also carefully monitor the addition of fragrance to ensure that the candle will burn cleanly and properly.

There is a maximum amount of fragrance that can be added to a candle before it no longer burns cleanly or properly. There have been reports of some homemade and craft-fair candles containing too much fragrance, or fragrances not approved for use in candles. This can cause a candle to burn improperly or unsafely.

A natural ingredient, as opposed to a manufactured or synthesized ingredient, is not necessarily any safer. In fact, scores of natural ingredients are known to be extremely toxic to humans in very small amounts. our factory is committed to manufacturing candles that use ingredients known to be safe and approved for use in candles, whether "natural" or synthesized.

Probably. Studies have shown that beeswax, paraffin and vegetable-based waxes are biodegradable. The vast majority of candles today are made primarily from these waxes.

No. By definition, a wax is not soluble in water.

Metal-core wicks are sometimes used in container candles and votives to keep the wick upright when the surrounding wax liquefies during burning. Today's metal-core wicks are made with either zinc or tin. Scientific studies have repeatedly shown both zinc- and tin-core wicks to be safe and non-toxic.

No. Paraffin wax – like all candle waxes - is non-toxic. In fact, paraffin is approved by the U.S. Food and Drug Administration for use in food, cosmetics, and medical applications. Food-grade paraffin is commonly used for manufacturing candles.  

Although millions of Americans regularly use scented candles without any negative effects, it is always possible that a particular fragrance might trigger a negative reaction in sensitive individuals. Individuals with known sensitivities to specific fragrances may want to avoid candles of those scents. In addition, consumers should remember to burn all candles, whether scented or unscented, in a well-ventilated area.  

Candles are safe when burned properly, responsibly and according to manufacturer directions. Nevertheless, it’s important to remember that a burning candle is an open flame, and thus a potential fire hazard if not monitored carefully.

When burning candles, consumers should follow these basic safety rules:

Keep lighted candles within your sight. Never leave a burning candle unattended.

Never burn a candle on or near anything that can catch fire.

Keep candles out of the reach of children and pets.

Trim wicks to ¼ inch prior to each use.

Keep candles away from drafts and vents.

Always use an appropriate candleholder placed on a stable, heat-resistant surface.

Read and follow all manufacturer instructions carefully.