Remote keyless entry keyless PKE for Toyota PRADO

Specifications

1. Low consumption standby currency: 0.6mA@12V

2. Large range of working voltage: 9.0V—24.0V

3. Working temperature: -40°C~85°C

4. Adopts original imported ignition IC instead of a relay which may cause touching point burnt or broken off when shaken.

5. Built-in double-button switch

6. High-temperature protection, high-voltage/short circuit protection

7. Power-off memory function supported to make sure the safety of driving

Host System

Operating voltage:12V±3V
Quiescent current: 20 mA
Current of shocking sensor:1mA
Output current(Max):Light 5A,    Siren:10A
                    Central locking 10A
Frequency:433.92MHz

Engine Start system

Operating voltage:12V±3V
Quiescent current: 20 mA
Output current(Max):
ACC/ON/START 30A

Smartkey System

Frequency:433.92MHz
Control Distance:Clearings 30M
Quiescent current:10 mA
Intelligent Recognition Distance:1.5M-2M
Operating voltage:3V
Battary code:CR2032 Li-Battery

Operation method

1. Power connected: if you just want to listen to music, just press the blue POWER BUTTON one time and ACC will be on. When you press it once more, it will power off.

2. Engine start: Keep pressing the brake, and press POWER BUTTON lightly and your engine will retrofire automatically.

How can I do if it can not be ignited due to low temperature in winter or low battery?

You can keep pressing the brake and POWER BUTTON at the same time until car is started.

3. Flameout: When engine is working, press the brake and then press POWER BUTTON for 0.5 Seconds and your engine will stop working automatically