acrylic acid printing binder for textile

Specifications

 Foshan Yimei chemicals co., ltd is a leading china manufacture of textile printing chemicals. Our company is located in Foshan, a garden city of Guangdong province. We possess a modern manufacturing base with an annual output capacity of 20000 tons.

    As an influential innovator and founder, we have leading the tide of this industry and enjoy high reputation in both domestic and oversea market.

   Our main products fall into 8 series such as printing thickener, printing binder, printing pigment paste, printing emulsifier ect,covering over 100 different kinds of products.

    We are very glad to serve you and hope to work together with you on the base of mutul benefit and co-prosperity.

     Your satisfaction is always our paramount pursuance. Your continuous attention to us is the permanent motive source of our further development.

     Welcome you kind enquiry and visit

Acrylic Printing Binder

 (DT-893A)

 General Description

DT-893A printing binder is a new model of eco-friendly binder made up of acrylic ester with viscous liquid appearance. It is 100% active and multi-functional self-cross linking agent.

Technique Data

     Appearance      Composition   Solid content    PH value        

Milk viscous liquid      Self-cross     40±2%         7.5~8.5

 Concentration: 2.5%~3.5%,

1. Initial viscosity of white paste after adding water will be over 70000mPa.s under Brookfield rotary viscometer spindle 4#, 6RPM.

2. Around 3.5% in flat screen printing with viscosity 50000mPa.s and around 2.5% in rotary screen printing with viscosity 33000mPa.s, after adding pigment and binder.

 Property and features

1. Color fixing can be done in low temperature, yet capacity of color fixing is strong after high temperature bake treatment.

2. Obviously improve the water-washing fastness of a printing coating,

Anti-adhesive effect and resistance to high temperature.

3. High performance in color fixing, friction, soaping and color brightening

 Usage

1. On preparing printing paste, add appropriate dosage of DT-893A to measured water and stir at high speed until reaching required consistency.

2. In case printing paste is not viscous enough, then add some EM618 when stirring.

 Safety Notes

1. Stored in sealed container under environment not too hot or too cold.

2. Try to use it within six months.

3. Storage temperature 10-35°C.

4. Please use cloth or soft paper to clean when getting blotched by thickener, and wash with salt electrolyte and water.

Notes: Above usages have been proved through practice. But considering practical printing techniques, please choose the right manufacturing process after experiment.

factory

workshop

reactor

pakage

printed fabric

welcome to contect with us,YIMEI always together with you!