new technology water treatment RO system for power plant industry

Reverse Osmosis technology is adopted for boiler makeup water in power supply industry, due to its characteristics of high desalination rate and automatic control operability.

Application:

For boiler makeup water in power supply industry,the conductivity must be lower than 0.2us/cm and content of SiO2 be lower than 0.02mg/L. However,conductivity of product water of two-stage RO system is over than 1us/cm in general.Therefore,RO system is adopted as primary desalination device for boiler makeup water.

1.RO+EDI system

Developed in the late 1990s, with product water conductivity is 0.05--0.07us/cm(resistivity ranges from 15 to 17.5MΩ.cm),which perfectly satisfy requirements for boiler makeup water. Compared with traditional ion exchange, it has advantages such as stable quality for product water,continuous operating, easy to operate,unattended,free of acid and alkali, environmental,small bulk and economical.

2.RO+mix bed

It is also adopted in boiler makeup water treatment, what's more,it is primarily developed from the ion exchange desalination system for boiler makeup water. Applicable to ion exchange means,the product water conductivity close to 0.055us/cm(resistivity is 18.2MΩ.cm) theoretically.

Packaging details: customized/wooden package

Delivery Details: 7-30 days based quantity

12 months warranty and free maintainance cost

24 after-sales service online

Whole life free technical support

Trace for order until you get the goods

Engineer available to go abroad for installation and training

Wentong Water Treatment Co., Ltd, established in 1997, 100 workers, over 800 square meter factory workshop and independent office space. Manufacturer of high quality water treatment equipment and spare parts for food, beverage, pharmacy, power plant, cosmetic, leather, electron and other industries.

As a manufacturer and enterprise supported by the government, we have obtained CE, ISO9001:2008 attestation and certificates from UK, Germany. 

1. Are you factory or trading company?

 We are factory and also a direct manufacturer for about 20 years in this field

2. What capacity of water treatment equipment you can manufacture?

 Generally from 250L/H to 200T/H

3. How long the consumables should be replaced?

Strictly speaking, it depends on source water quality. There is an approximate timetable for consumables replacement:

a. quartz sand, activated carbon:    2-3 years

b. water softening resin:                  1 year

c. PP filter element:                      2-3 months

d. RO membrane:                         2-3 years

e. UV lamp:                                  8000 hours

All the consumable replace period will be depend on the feed water quality.

  Feel free to contact with us!