SANYYO grinder crusher mill widely used in agricultural industry

Detail Introduction

This is a complete crushing and bagging machine, which is used to crush and bag maize etc as required in the agricultural industry. It works at a medium speed, and comes complete with a bag dust extractor which reduces environmental pollution, as required by international standard authorities.

Working Principle

Hyperbaric milling machines, roll grinding hanger on fastening a 1000-1500kg pressure hyperbaric spring. Roller stared work on the rotating spindle, and high-pressure spring and the effects of centrifugal force to keep Central rolling mill, rolling the same dynamic pressure than under the conditions of Raymond Mill powder machine 1.2 times the yield increased substantially.
When the mill was grinding material into the cavity, followed by a shovel blade into the roll grinding and grinding between Central RCC, RCC after the powder with the blower into the cycle of the wind machine, qualified with the powder into the air Cyclones Set-which is refined powder, granular materials down to regrinding. Back to the wind circulation blower to repeat the above process, remaining wind would goes to bag filter for air purification. When it is up to certain wear between grinding roller and ring, by adjusting the length of high-pressure spring to maintain stable pressure between grinding roller and grinding ring, the stable output and fineness of product can be guaranteed.

Friendly exchanges with guiers over the world

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.And we are located in Pudong area,Shanghai China.Nearby the Pudong International air port!

Q: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 25-30 days if the goods are not in stock, it is according to quantity.

Q:Payment
A:30% by T/T in advance once sign the order + 70% before shipment

Q: What about Warranty? what will we do if the machine is broken down
A: The warranty period for all of huahong’s structural and mechanical equipment is normally two years longer than the other suppliers. Wear parts are not covered in warranty unless the component part is found to be flawed.In the warranty periods,our sales engineers will be to the machine working spot to repair the machines with free of charges.

Q: What should we need to do for if we want to get a best quotation
A: Hi guiers over the world, if you want to get the correct and exact selection of the model earlier ,please help us with following information
1.the capacity (tons per hour )
2.input and output size
3.stone material to be crushed

Our packing and payment terms

1.We usually accept T/T,L/C,D/P,D/A.
2.T/T: 30% in advance as the deposit payment,the balance will be paied before shipemt;
3.We will take pictures of finished products before delivery.
Ways of Packing
exporting standard packing,for example:wood packing,bulking packing,iron packing,nuded packing,etc.

Transportation:
1.By sea Freight or by air.
2.MSK/MSC/APL/EMC/WANHAI/KLINE/CMA/NDS,etc.Also we could meet the customer's requestments if they have nominated shiping company.
3.In order to meet customer's requestments for tariff preference,we will provide the full set clearance docs,also provide you the CO/CNCA/Form E,etc.

Thank you for your kindly patient reading!
Any needs and technical problems, contact us freely. We are more than glad to help. Our engineer will design the best solution drawing for you as your requirements !

Welcome to Clirik !
Our factory is just need 20 minutes far away from the NO.8 Metro, We can pick you up from there.

You may interested in other products,click below pictures will take you big eyes.