WM129 FJ solid Pine Shoe Moulding

WM129 FJ solid Pine Shoe Moulding

The Shoe moulding / Quater round / Door stop are made of FJ Solid Radiata pine / LVL(LVL is a kind of plywood),Pre-coated with thin primer.

Main Profiles for the North America market primed moulding:

Quarter round & Shoe moulding  & Door Stop

Door Casing & Wall Baseboard & Crown moulding &  Trim Board,etc

Manufacturing process
---- Timber cut into board,Kiln dried, FJ,Via Shape, Sanding, two coat primer and packing etc

1)The timber logs are cut into boards.
2)then kiln dried to within 8-12% moisture range to ensure stability through the successive manufacturing processes.

3)After KD,the boards should stay in warehouse for more than 20 days (Note that diffreent size board require

    different days),to keep the material more stable and to make moisture content more uniform.It's very important.

4)The defects on the board will be cut before finger jointed.The length of moulding can be finger jonted up to 18ft,

   Or as customized.After that,the finger jointed board would be through rough sanding,then make into shape

   (as customers' drawings) by the Shape machine.

5)Then the raw unprimed moulding will be through two coat primer(Sanding between coat),then waterbase paint.

    Coating application would be applied equally on all edges have a strong adhesion to the wood substrate.

6)Shrinkable PVC film and plywood Pallet.

The Surface finish of  primed wood moulding is inspected piece by piece,
Measure the Moisture content Dado  Size Tolerance Twist(bengding)

What Certificates Reshine Provides?