Jaw crusher 250x400 with low energy waste and high productivity

Jaw crusher detail introduction

Our SANYYO Jaw Stone Crusher is widely used in Building material,Cement material,Metallurgy & Min Coal,Chemical,Refractory material,Quartz & Glass raw material,Artificial,sandy soil,Stone material plant,Sand material plant,Highway construction and so on.So different materils will be satisfied with you.They can meet most crushing requirements in primary and secondray crushing,the PE models are max feeding,will be fit for primary crushing,the PEX models are fit for min feeding,as for the second crushing. Also our jaw stone crusher for maximum compression strength of materials to be crushed is 350MPA.

Jaw crushers features and advantages
1.Our SANYYO Jaw Stone Crusher has Strong structure and very reliable
2.High crushing ratio with a large output capacity;
3.Wedge design setting adjustment which allows for the production of different sized material
4.V-shaped design allows for feeding of bulk volumes of large sized material into the crushing cavity where there are no dead zones;making this machine highly productive and very efficient
5.Lubrication system - safe and reliable, easy to maintain
6.Can be used in stationary or semi-mobile type
7.The eccentric shaft is fitted with four bearings, two on each sides which extends service life.

Working principle of Jaw crusher
The motor transmits power through belt,drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft.The angle between toggle plate and moving jaw plate increases when moving jaw moves.So the moving jaw moves towards the fixed jaw.The stuff will be crushed in this process.The angle between toggle plate and moving jaw decreases when moving jaw moves down,the moving jaw moves leaves fixed jaw by pulling rod and spring,the final crushed stuff will be discharged from the outlet.
Jaw crusher is composed of primary crushing and screening station and secondary one, belt conveyor, etc. Every crushing station is an independent working unit, they can respectively assume their different responsibility, and the belt conveyer is responsible for material transmitting and piling up between each crushing station.

Jaw crusher characteristics

1.Strong structure and very reliable.
2.High crushing ratio with a large output capacity.
3.Wedge design setting adjustment which allows for the production of different sized material.
4.V-shaped design allows for feeding of bulk volumes of large sized material into the crushing cavity where there are no dead zones, making this machine highly productive and very efficient.
5.Lubrication system - safe and reliable, easy to maintain.
6.Can be used in stationary or semi-mobile type.
7.The eccentric shaft is fitted with four bearings, two on each sides which extends service life.

Jaw crusher PE250*400 technical parameter

Jaw crusher working spot

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.And we are located in Pudong area,Shanghai China.Nearby the Pudong International air port!

Q: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 25-30 days if the goods are not in stock, it is according to quantity.

Q:Payment
A:30% by T/T in advance once sign the order + 70% before shipment

Q: What about Warranty? what will we do if the machine is broken down
A: The warranty period for all of huahong’s structural and mechanical equipment is normally two years longer than the other suppliers. Wear parts are not covered in warranty unless the component part is found to be flawed.In the warranty periods,our sales engineers will be to the machine working spot to repair the machines with free of charges.

Q: What should we need to do for if we want to get a best quotation
A: Hi guiers over the world, if you want to get the correct and exact selection of the model earlier ,please help us with following information
1.the capacity (tons per hour )
2.input and output size
3.stone material to be crushed

Our packing and payment terms

1.We usually accept T/T,L/C,D/P,D/A.
2.T/T: 30% in advance as the deposit payment,the balance will be paied before shipemt;
3.We will take pictures of finished products before delivery.

Ways of Packing

exporting standard packing,for example:wood packing,bulking packing,iron packing,nuded packing,etc.

Transportation:

1.By sea Freight or by air.
2.MSK/MSC/APL/EMC/WANHAI/KLINE/CMA/NDS,etc.Also we could meet the customer's requestments if they have nominated shiping company.
3.In order to meet customer's requestments for tariff preference,we will provide the full set clearance docs,also provide you the CO/CNCA/Form E,etc.

Thank you for your kindly patient reading!
Any needs and technical problems, contact us freely. We are more than glad to help. Our engineer will design the best solution drawing for you as your requirements !

Welcome to Clirik !
Our factory is just need 20 minutes far away from the NO.8 Metro, We can pick you up from there.