3D Printer Power Continued to Play Module Printing 3d printer price

  3D Printer Power Continued to Play Module Printing 3d printer price

Note: This module should be used with the Chitu V3.6 Motherboard, so you need to buy the Chitu Motherboard if you want to use this module. This link of the module is for spare purpose.

This module can help to achieve breakpoint play/Power Continued to Play, automatically turning off after the printing finished, begin to print from the specified layer, etc. . It can help to achieve interactive printing, and to help in the cases like the power off or you have to leave during the printing, and other issues, considered to be one of the most useful features in 3D printers.

FAQ

Q: Why it shows "it's turnning off", but actually not?
A: Power continued to play modules need to be used with the non-self-locking reset switch. Please check whether this switch is in use, or the switch is able to automatically reset.

Q: Press the switch, but the machine is not opened properly, or the machine automatically turn on after power turned on without  pressing the switch?
A: Generally it's caused by incorrectly wired or the poor contact of the signal line, so please check the wiring.

Please click the pictures below if you need the other modules.