PUHUI t962a reflow oven,mini wave soldering machine price,mini desktop smd reflow oven,taian

T962A Description: 

The INFRARED IC HEATER T962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed. 

A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMD/BAG and other small electronic parts mounted on a PCB assembly. The T962A may be used to automatically rework solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes. 

FEATURES 

(1) A large infrared soldering area 

Drawer panel area: 300*320mm; this increases the usage range of this machine drastically and makes it an economical investment. 

(2) Choice of different soldering cycles

Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down. 

(3) Special heat up and temperature equalization with all designs 

Uses up to 1500 Watts of energy efficient Infrared heating and air circulation to re-flow solder. 

(4) Ergonomic design, practical and easily operated 

Good build quality but at the same time light weight and a small footprint allows the T962A to be easily bench positioned transported or stored. 

(5) Large number of available functions 

The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.

(6) 8 waves for choice 

we provide eight different waves, please choose one according to your request. Press the F1/F2 to choose different wave, press F3 to look into different wave parameter, press 4 to confirm the wave you chose.

Wave one, use the same with  85Sn/15Pb   70 Sn/30Pb

Wave two, use the same with  63Sn/37Pb   60 Sn/40Pb

Wave three, use the same with  Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu.5

Wave four, use the same with Sn/Ag2.5/Cu.8/Sb.5; Sn/Bi3.0/Ag3.0

Wave five, use the same with The red gum standard is solid to turn temperature wave,Heraeus PD955M.

Wave six & seven & egiht, use the same with The PCB circuit board returns to fix etc.

Wave seven & egiht, use the same with the wave cycle set-up by yourself.