Wood/acrylic/leather/cloth laser drawing machine, EXLAS X4i 6040

EXLAS-X4i Laser Drawing Machine 6040

Our new EXLAS X4i laser drawing machine use close type linear rails design, machine construction is more reasonable, with very low noise, we are using best aluminum material, we widen belt, that is, 25mm X belt  and 20mm Y axis belt, laser head can move up and down to achieve high accuracy auto focus, control part of control cabinet separate with driver, two control cabinets on both sides of machine, hermetic sealing and equip cooling fan, THK rail guild as option, machine color option.

Standard Models laser cutting machine

Belief introduction of laser cutting machine

1. English version Lasercut software supporting 10 commonly used graphic formats.

2. DSP off-line control with USB port interface

3. US Imported focusing lenses, choice of  4", 2.5"  focal lengths.

4. Focusing is simple by touching two button, takes only 3 seconds

6. All models feature a red dot alignment pointer, helping you to properly position your work under the laser head

7.Un-limited feed-through door , we can only add the auto-feeding system allows the use of roll material and unlimited sheet length

8.Air asist ,we will provide you one set air compressor, you can turn up/down the switch between the laser head to control the strength of air blowing. To avoid getting fired and blow away the dusk /smoke.

 9. Exhaust fan&vacuum table, this pulls fumes and debris away from the work piece; the resulting vacuum is strong enough to straighten and flatten thin materials against the work table for cutting and engraving in perfect focus.

10. The price include one set EXLAS, exhaust fan, air assist compressor , one tool box, CD friendly training video and user macnual,and one year warranty.

11. The water chiller, exhaust fan, air compressor are embedded inside the machine, control panel can control water chiller and exhaust fan with vibration isolation equipment, which is more convenient for user.

Laser Cutting Feature: 

1. Clean cut edges without burr for more efficient material utilization 
    and reduced secondary operations. 
2. Cutting of various material thicknesses and combinations in one operation
3. No material deformation due to contactless material processing
4. Highly controllable, repeatable and accurate processing. 
Etc.

Laser Cutting Application:

• Architectural Models
• Handicraft industry
• POP displays, advertising signs, LGP
• Awards & Trophies
• Signage, door plates, nameplates & plaques 
Etc.

Optimized Materials:

• Plastics (Acrylic, Nylon, Melamine, PCB…)
• Synthetic resins (PE/PVC/PS/PP/ABS…)  
• NOTE: we suggest choosing the professional Air Extraction System to 
  avoid chemical risks during cutting PVC)
• Wood and by-products (Plywood/MDF/Veneer/Delrin/Laminate...)
• Paper (Pressboard, Cardboard)
• Leather
• Fabric
Etc.