Continuous Waste Plastic Oil Press Equipment

                           Continuous Waste Plastic Oil Press Equipment

Prouduct Description of Waste Plastic Oil Press Equipment

"Five kinds of Waste Plastic Oil Press Equipment for You"

1)Oval and Half-Open Door

Advantages:

a.Easy and fast to get steel wire;

b.Convenient to set up environmental protective devices; 

c.Heating up very evenly and the speed of oil discharging is fast;

d.The heat emission of reactor is fast.

2)Double Round Door

Advantages:

a.Convenient to feed-in materials;

b.Convenient to set up automatic feeder and other devices. 

3)Round Door in Center

Advantages: 

a.Low cost and well sale; 

b.Especially for plastic.

4)Big-Round Door

Advantages:

a.Convenient to feed-in materials;

b.Heating up very evenly and the speed of oil discharging is fast.

5)Fully-Open Feed-in Door

Advantages:

a.Easy and fast to get steel wire;

b.Convenient to feed-in big tyres.

Capacity of the the Waste Plastic Oil Press Equipment

Processing Time of Waste Plastic Oil Press Equipment

Security

1. Use auto welding machine to make the reactor can ensure the quality of welding seam, avoid

    cracking and has a long life for about 8 years.

2. Vacuum system prevent oil gas be back to reactor causing accident.

3. Professional thermometer, auto decreasing pressure device, oil-water separator, anti-back fire,

    negative pressure device.

Energy saving

1. New designed reactor case, with particular thermolith and asbestos cover. Increase life time

    and make reactor get heated uniformly.

2. The exhaust tail gas recycled for reactor heating. 

Environmental friendly

1. Three layer dedusting system to prevent gas and dust from coal burning.

2. Exhaust gas will be recycled for heating the reactor, no gas pollution. 

3. Total well sealed reacting system and slag discharging system can prevent odor and ash

    releasing out.

Packing & Shipping of the Waste Plastic Oil Press Equipment

Certificate of the Waste Plastic Oil Press Equipment

 Case Example of Waste Plastic Oil Press Machine

Installation & Commission of the Waste Plastic Oil Press Equipment

1) Foundation drawings will be provided after making the order.

2) Engineers provided overseas  installating and commissioning. 

3) Trainings and other essential basic instructions will be provided.

Tips for You in Setting Up the Waste Plastic Oil Press Equipment

1) 300 square meters (length 20M, Width 15M) is enough for the equipment itself.

2) Installation site suggest in outdoors with good ventilation and saftey facilities.