China supplier oil recycling plant oil distillation plant 10 ton tyre pyrolysis plant with CE/ISO

 Customer First ! Quality First ! 

Distillation process schedule:

3 days can refine 10 tons crude oil, 3 days as a cycle,  you can continually feed the crude oil in the duration

the proportion of diesel is about 85%-90%

Information of machine

1. Heating system

Reactor using 245R boiler steel and the thickness is between 14mm and 18mm.(The thickness would be adjusted according the requirements of the customers). The main engine uses horizontal-type of 360ostructure-0.4 r/min

2. Separation system:Gas separator & Depositing tank

Depart the heavy oil and impurities from the oil gas to purify the oil.

3. Condensing system

a. The "S" shape extends the condensing area.                 

b. The open pool makes natural cooling viable, which is energy conservation and free of danger

c. Cooling down quickly with the pipeline diameter of 219mm and length of 6m                                              

d. The elbows make it easier and convenient to clean and maintain                 

e. Just need to make up the vaporized water, it's water conservation  

f. Condensing tower and  vertical condensers can be added based on the customers' requirements    

4. Exhaust disposal system:Desulfurization dedusting, Water film cyclone

1) Desulfurization dedusting: remove the sulphur(when use coal as fuel) and dust

2) Water film cyclone: for the second removal and the smoke from the waster film cyclone is white, but pollution-free.

5. Waste gas recycle system:Water seal & Spray fire gun

In the process of refining oil, when the gas is heated up to 150 , it will produce a large amount of gas-CH₄& C₄H₈ , which cannot convert to liquid at normal temperature and normal pressure. However, these gases can be used as fuel, which is not only environment protection but also energy conservation.

We have different machines and have different prices

  Technical comparison among refined diesel, miscella and GB 0 diesel 

The terms of payment: 

1). 30% advance payment within 7 days after sign the contract by T/T.

2).70% after receiving the copy of Bill of lading from the seller by T/T.

our certification

If you want to know some about our equipment , please contact with me !  Thank you !  

welcome to our factory !