Construction equipment,JKR45 double stage vacuum extruder

Clay Brick Making Machine

JKR45 Double Stage Vacuum Extruder

Brick making production line description:

1. Structure: all steel structure. it is made by high quality steel plate welding;

2. Suitable range: the small brickyard or the area which is lack of electric power;

3. Extrusion pressure: 2.0MPa, it can make both solid and hollow brick;

4. Control: adopts pneumatic clutch; 5. Bearing: it is provided by Luoyang bearing group.

6. Main axle techniques: Quenching, tempering, the suppression experiment, so strengthen main axle's steel and toughness.

7. Rack techniques: whole welding and overall plane processing, these can make better for the machines' concentrically.

8. Techniques of squeeze out cylinder and vacuum chamber: the whole processing, quenching processing, these can increase the toughness and extent complete machine life.

9. Vacuum chamber: adopts the funnel shape, it can pull out the vacuum fatly.

10. Reamer techniques: adopts the high chromium casting, quenching processing, the service life reaches (8,000,000-10,000,000 standard bricks), it is better than the ordinary spray coating craft.

Technical parameter:

Whole process:

1)Material is put into box feeder to make sure continuous feeding.There is a reamer near the discharging hole of box feeder.It can crash big block.

2)Then material is conveyed to roller crusher and crashed into powdery.

3)After that material is conveyed to double shaft mixer.Add water when mixing the material to make it more even.

4)Material is conveyed to brick vacuum extruder.The machine process the material and squzees out  mud strip.

5)Strip cutter cut the mud strip into equal length strip and convey them to cut adobe plate

6)Adobe cutter cut the brick strip into green brick adobes.

7)Green bricks pass stoving and sintering processes become red brick.