Paired sliding folding glass partition wall

Paired sliding folding glass partition wall 

EGOOD 65 SERIES -Frameless glass sliding partition wall

1)Frameless glass panels are suspended from an overhead track and carrier system -- no floor tracks or guides are needed;

however, the panels require floor pins and receptacles in the floor to keep them secure in the opening.

2)Sliding glass partition wall are made from a sheet of glass attached to top and bottom aluminum horizontal rails.The panel are shipped fully assembled.

3)Egood standard factory glazing consists of 1/2’’[12mm] tempered clear glass.An optional acid washed.

An optional acid washed, satiny translucent or frosted glass is also available. However, custom laminated glass (9/16" [14mm]),

acrylic panels, and art glass can be used when designed to fit the horizontal rail tolerances. The glass may also be etched or decals added.

4)The term frameless is used due to the lack of a vertical frame member. The glass edges are polished for a smooth finish.

There is a 1/4” - 1/2” [6-12mm] gap between panels to prevent the edges from touching. The size of the gap varies due to glass tolerances.

In some instances, Egood can supply a vertical trim and provides an overlapped edge frame.  

Paired sliding folding glass partition wall