Stalwart Emergency Auto Safety Tool - One Tool Does it all(Lighting and flashing alert+Seatbelt cutter)

Specifications

 Working principle: 
Emergency safety tool includes life-saving impact needle, seatbelt cutter and lighting. Cranking for power to charge its inner battery. Life-saving impact needle is worked by pressing build-in spring to remove the needle, so as to smash the glass.
 Functions : 
1. Cranking for power to charge its inner battery.
2. Lighting and flashing alert.
3. Life-saving impact needle.
4. Seatbelt cutter.

 Features :
1. Cranking to generate power, no external batteries needed; Green, environmentally friendly, economical and safe.
2. High brightness (3 LEDs), good for lighting.
3. Life-saving impact needle breaks through windshield in urgent condition.
4. Cutting the seatbelt in case of emergency.
5. Novel, fashion and exquisite with high efficiency.

Main Technical Parameters 
1) Lighting :
The external force of breaking the glass ≥55N, ≤75N
The max. luminous flux ≥9 Lm
Lighting time after 1 minute cranking ≥10 Minutes
Flashing time after 1 minute cranking ≥60 Minutes
Lighting time after being charged fully ≥80 Minutes
Flashing time after being charged fully ≥2 Hours
2) Main parts life-span:
Switch 10000 Times
Seatbelt cutter 500 Times
The whole unit 5 Years (Seatbelt cutter uses more than 400 times.)
The plastic part 5 Years
3) Size and weight:
Product size 122*52*59 mm
Product weight 118 g
4) Others:
Specification of built-in battery NI-MH battery 80mAh, 3.6 V

 Operation Method : 
1. Lighting and Flashing: Forward switch at the first position to flash, forward at the second position to light.
2. Charging: Hold the unit with one hand and crank the handle with the other at the speed of 3 cycles per second.
3. Life-saving impact needle: Take off the protective cover, then stress the head onto the glass until the distance is less than 0.5mm, so as to smash the window.
4. Seatbelt Cutter: Cutting the seatbelt by insider cutter.
 Cautions: 
1. Don’t stress the life-saving impact needle to human, so as not to hurt people.
2. Don’t put the solid objects with less than 3.5mm diameter into the cutter, so as not to hurt the cutter.
3. Don’t point at eyes directly, so as not to hurt the eyes.
4. In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
b) Please crank it for at least 1 minute once a month.
5. Do not place this product in where temperature or humidity is high; Do not drop or hit this product.
6. The product will be a little hot if cranking for a long time.
7. We do not give notice again if the parameter of this product changed.
8. We reserve the final right to interpret this product.