Epoxy & Consumables for fiber optic connectorization

Specifications

                                 Anaerobic Adhesive HW-680L

•This anaerobic adhesive kit from Corning Cable Systems are designed to work with anaerobic connectors. Please refer to the connectors department for Anaerobic Connectors info.
•Kit includes:
1. 10ml Loctite 680 anaerobic adhesive
2. 1.75 oz. Loctite 7649 primer
3. 10 pcs of 3cc syringes and needles

                                      EPO-TEK 353ND Epoxy  RPD-01

•The two-part EPO-TEK Epoxy is a favorite of many fiber optic users.

                                           EPO-TEK 353ND Epoxy  RPD-02    

This fiber optic epoxy remains liquid until heat is applied. The application of heat provides a quick cure, turning the epoxy to a reddish-brown color.    

                                     Optical Matching Gel HW-04MG

•To reduce optical loss within fiber optic mechanical splices and connectors.
•The use of optical couplant, also known as index matching gel, helps to reduce the difference in the index of refraction that exists at the interface of two mated optical fibers.
•Net: 0.40oz

                                            Epoxy Application Syringe

•This syringe comes in a complete package with syringe body and a 0.9mm needle dispenser( 5 sets/pack).
•This syringe and needle are designed to inject epoxy into the connectors

                                           Safety Glasses HW-06SG

•Wear safety glasses to protect your eyes from accidental injury when handing chemicals and cutting fiber. Pieces of glass fiber are very sharp and can damage the eye easily.

                                                Piano Wire

•Piano Wire provides you with an easy way to save a fiber optic connector when an optical fiber breaks inside the ferrule during connectorization. Fiber Optic Piano Wire also enables you to remove broken optical fiber from bare fiber adapters.