GPS Car Tracker with Relay For Cut off Engine-K11 model

Function

Function Details

Function Description

Vehicle Monitoring Function

Check location timingly

Check real time vehicle data with setted time interval

Timing Monitor

Set time interval for monitor

Blind area data upload

Memory 200pcs blind area data and upload it to online tracking platform when the signal is back

Version Checking

Check version via online tracking platform

Mileage setup

Set initial value of mileage

Cut off Engine

With relay, send SMS to cut off engine and restore.

SMS Function

SMS Command For online tracking setup & check parameter

SMS command for online tracking; <CKBSJ> to check terminal parameter

Check location

Send “map” or “position” to check google link

SMS set time interval

Send sms command “ACC ON/OFF+time” to set upload data time interval of ACC ON & ACC OFF

Restart via SMS

Send “restart” to restart tracker, parameter will not changed.

Vehicle Alarm Function

Upgrade firmware in air

Need cooperation of customer and supplier

GEO-Fence Function

Max. Set 10 fences and trigger alert when it enter or exit the fence

Over-speed alert

Set over-speed alert data and when the speed is over this data, alert will triggered.

Low Voltage Alert

Triggered when main power voltage is lower than 10V

Vibration Alert

When the vibrated accelerate speed is more than set data, vibration alert will triggered and upload a location information to online tracking platform

Others

Open/close car door remotely

Open/close car door via online tracking platform.

Inflection point

Upload location online when the turning angle is bigger than set

LBS Location

Locate the vehicle according to LBS

Check time

Tracker will use GPS time if it is working promptly(can get location), or, it will use time of online tracking platform

Phone call & SMS report

Phone call & SMS information will upload to platform (include SMS content, number, time, etc.) Max. 10pcs.

Check SIM Card credit via platform

Check tracker SIM card credit via online tracking platform.

Low Power Consumption Mode

Turn to low power consumption mode after 5 minutes of ACC OFF. This status will upload to online tracking platform with location. Tracker will wake up and turn ACC ON if it is vibrated, if there isn’t vibration in the future 10 minutes, it will turn to ACC OFF again.

No.

Item

Parameter

1

Working Voltage

DC 9-36V

2

Working Current

Normally 30-55mA@12V

Sleeping Mode 16-20mA@12V

3

Size

88*50*18mm

4

Positioning mode

GPS

5

Positioning Accuracy

<10m

6

Communication Network

GPRS

7

Communication Mode

TCP/UDP

8

Working Temperature

-25 to +75 centigrade

9

Storage Temperature

-40 to +85 centigrade

10

Weight for main unit

54.8 g

11

Backup Battery

3.7V 280mAh Li-ion battery