self adhesive fiberglass mesh tape

Description :

The product is fiberglass mesh coated with acrylic.the alkaline-resistance of acrylic,the chemical stability and no oxygenated property of fiberglass make the tapes have following properties that other materials can not be compared

Performance inculde

Self- adhesive . Faster application .No pre- plastering required easy to apply , resists cracking , do not rot , no blisters or bubbles , more environmentally –friendly job , It won’t tear, shrink , stretch or bubble , white it hides joints , cracks and holes permanently .

Advantage

 good performance of alkaline-resistance;
high tensile strength and deformation-resistance ;
excellent self-adhesive performance
well arranged
simple and easy to be applied

Usage

Repair the cracks and joints or holes of drywall plasterboard stucco and the other surface

Breed

CNT75-9X9 75g/M2

CNT65-9X9 65g/M2

CNT64-8X8 64g/M2

CNT70-8x8 70gM2

CNT50-8X6 50g/M2

Other specifications are avaible upon your request

The use of tape
Construction method :
1.Wall must be clean and dry
2.Center and apply tape over the length of the joint, pressing firmly.
3.Apply a generous first coat of compound over the tape and though the mesh,making sure to completely fill the joint crevice.when the joint has been completely filled,wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4.Let dry completely ,then sand slightly.
5.Apply sufficient thin finishing coats to produce a smooth wall surface.
6.Cut or butted boards do not have a tapered edge.therefore,special care must be taken to assure proper compound that willequire an increased amount of edge feathering.
caution :
1.Failure to completely fill the joint may result in cracking
2.For best results,use a setting-type compound