Collet Chuck high quality DIN6388B EOC16B/20B/25B/32B/40B/50B collet

1. Material: 65Mn
2.Hardness: HRC56-60
3.Max clamping range:0.5mm

  If no special requirement, we would supply to you according to II grade; if you require I grade, the price would be advanced.

Mounting instruction for EOC collet and nut.

1.Put the collet into the nut in level direction,push in into the nut.

2.Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing.Wipe the straight shank of cutter, and insert it into the pilot hole.Tighten the nut with a wrench till the cutter is clampinged heavilt (Caution: never tighten the nut without cutter in it for it will break).

3.When changing the tool, loosen the nut and it shall bring out the collet and the cutter together, and then draw the cutter out push out slightly the collet in the offered direction, it shall be ready for any change of the cutter.

No.1

Has been committed to provide the best service for old and new  customers

No.2

Product quality and after-sales  service is guaranteed

No.3

Can be customized according to customer's drawings

Favorable Comment

Best stainless steel wing nut anchor bolt for construction fastener bags+cartons+pallets according to customer ' s requirement,Best stainless steel wing nut anchor bolt for construction fastener bags+cartons.

Favorable Comment

Best stainless steel wing nut anchor bolt for construction fastener bags+cartons+pallets according to customer ' s requirement,Best stainless steel wing nut anchor bolt for construction fastener bags+cartons.

Favorable Comment

Best stainless steel wing nut anchor bolt for construction fastener bags+cartons+pallets according to customer ' s requirement,Best stainless steel wing nut anchor bolt for construction fastener bags+cartons.