High Precision Electronic Scale ,Electronic balance,0.1g precision weighing scale LCD display

Cartons lined with safety foam or advised
Machine Dimensions
205*190*170mm(Packing Box : 320*250*140mm)

Specifications

Brief Introduction

     HIGH PRECISION ELECTRONIC BALANCE Is a professional high-tech products,Is now widely used in all walks of life,All kinds of high requirements of weighing, testing, analysis, etc..It have played an important role to improve product quality, economic benefits and work efficiency. It also have the following features.

     Technical Specification

  Notes!

1. This electronic scale must be installed on a flat and stable place without strong wind and vibration.
2. The gradienter shall be adjusted to the right position in the middle(by adjusting the adjusting bases on the bottom).
3. There should be no weight on the balance when the balance in switched on.
4. In order to ensure the accuracy of electronic scale, you had better warm up the balance for 20 minutes before operation .
5. If the figure showed on the screen don’t point at the zero position while the scale pan is in empty cases, you shall press [TARE]Key to clear the display and make it return to zero.

Instructions to the keys on the controlling panel :

  [ON/OFF]:Switch on or off.

  [UNITSW]:Unit Conversion Key: g, lb, oz, ct, dwt.

 [TARE]:Press this key to deduct the weight of the container on the scale pan.

 [MODE]: Counting key, Press this key to enter the counting mode.

 [CAL]:CAL key to enter calibration.

  ESHOW PICTURES