KT-4G Max coverage 1000sqm 4G LTE Mobile Signal Repeater booster Quality Choice

What is the booster?

Cell phone signal booster (also named repeater, amplifier) is a product designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, however there are a lot barriers make it is unavailable to get sound signal. When people enter some tall buildings, some places basement malls, restaurants and parking lot, some places of entertainment such as karaoke sauna and massage, some public place such as subway, tunnel and etc. where cell phone signals can not reach, now the cell phone signal booster can solve these problems! The entire range of mobile phone signals can be well used; we all will get great convenience and benefit from sound signal.

Specification of Mobile Signal Repeater ST4G Max coverage 1000sqm

ST-4G Mobile Phone Signal Repeater complete set introduction

If you need a 4G signal booster for your personal home use , We recommend you choose the easy installation Opion.

The Above complete set installation Steps :

Step 1 : Set the outdoor antenna at the place where have a good signal ;

Step 2: Use the 10meters cable to connect the outdoor antenna and the repeater (outdoor side );

Step 3: connect  the indoor whip antenna on the repeater directly ;

Step 4:Plug the power supply , the repeater will work fine ,and your mobile signal be 5bars immediately !

(Please pay attention , Never plug the power supply before you confirmed antenna and cable be connected well , otherwise the repeater will may be broken. )

The Above complete set installation Steps :

<![if !supportLists]>1.    <![endif]>Install the outdoor antenna option to the good signal place or Basestation direction;

<![if !supportLists]>2.    <![endif]>Use the 8meters cable to connect the outdoor antenna and repeater ”outdoor side “

<![if !supportLists]>3.    <![endif]>Use the 3meters cable to connect the indoor antenna and the repeater “indoor side “

<![if !supportLists]>4.    <![endif]>Plug the power supply, the repeater will work fine ,and your mobile signal be 5bars immediately !

(Please pay attention , Never plug the power supply before you confirmed antenna and cable be connected well , otherwise the repeater will may be broken. )

The Above complete set installation Steps :

<![if !supportLists]>1.    <![endif]>Install the outdoor antenna option to the good signal place or Basestation direction;

<![if !supportLists]>2.    <![endif]>Use the 8meters cable to connect the outdoor antenna and repeater ”outdoor side “

<![if !supportLists]>3.    <![endif]>Use 1 meters cable to connect the splitter and repeater “indoor side”

<![if !supportLists]>4.    <![endif]>Use the 2piece 3meters cable to connect for the 2pcs indoor antenna

<![if !supportLists]>5.    <![endif]>Plug the power supply, the repeater will work fine ,and your mobile signal be 5bars immediately !

(Please pay attention , Never plug the power supply before you confirmed antenna and cable be connected well , otherwise the repeater will may be broken.

1. Every internal antenna has a maximum coverage of 100 up to 300 m2, regardless of the range and power of the repeater.
2. You always need a splitter + extra coaxial cable when you want to install a second internal antenna.
3. Use one internal antenna per room under normal circumstances.