SINODER Brand Edible oil making machine includes:oil pretreatment machine,Solvent Extraction Machine,oil refinery plant

Specifications

  Solvent Extraction Machine

Oil Refinery Machinery, Oil Extraction Machine, Oil Mill Plant, Oil Extraction Plant
 
Edible Oil Refining From Vegetable Plants
 
 
Edible oil refining includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of vegetable/edible oil processing, one is physical refining and the other is chemical refining. However, no matter what kinds of reining methods, they are all done with the help of various oil processing equipment and machinery, and are used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
 
The following main equipment are necessary: Lye tank, Hot Water Tank, Water Ejector, Water and Steam Ejector, Steam Header, Soapstock Vessel, Refining Tank, Decolorizing tank, Deodorizing Vessel, Oil separator, Vapor Superheader, Oil Seperating Tank, Clay Tank, Filter, Alkali Dissolving Tank, Decolorized Oil Tank, Oil Pump ,etc.
 
Refinery Methods : mainly Chemical refinery and Physical Refinery
 
Chemical Refining & Physical Refining 
Edible/vegetable oil refining is a step by step process. Refining oil removes phospholipids, pigments, off-flavors, free fatty acids and other impurities. The entire oil refining plant process comprises degumming/neutralization, bleaching, deoderization, and winterization. Chemical refining is performed in order to remove the fatty acids from the crude oil that is extracted from the seeds. These are further neutralized with the use of caustic soda. This results in the removal of sodium soaps by batch settling or centrifugal separators. The neutral oils are then bleached and deodorized.
 
Apart from chemical refining, another method that is used for edible oil refining is physical refining. Through this method, the free fatty acids are removed through the process of distillation in one stage of deodorizing. In order to come up with effective results, the crude oil should be thoroughly degummed. This is not applicable with some oil like the oil extracted from cottonseeds. All kinds of refining methods are done with the help of various equipment and machinery, and are used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, linseeds, groundnuts, sesame seeds, and mustard seeds, etc.
 
Physical and chemical refining is defined according to the technology used. Physical refining means the removal of gum in oil via the process of degumming, a special method for removing FFA in the process of deodorization by steam. Chemical refining, however, means chemically removing FFA (acid-base neutralization). Gum and soap produced is then separated by centrifuges.
 

Features of Physical Refining
l         High refinement rate; less oil loss
l         No waste water discharged
l         More FFA distilled
l         Especially suited for highly acidic oils, and those of low gum content
 
Physical Refining is suitable for some kinds of crude oil with the less non-hydratable phospholipids and high FFA. It has the special characteristic than chemical refineing method.
 
Mainly including to the following steps.
 1.Deguuming & Pre-bleaching   
 2. Dewaxing /Winterising /Fracnation
 This is only for the several kinds of veg oil ,such as sunflower,cottonseeds,palm,rice bran,etc.
 3.Distilling for neutralizing & bleaching,deodorizing
 
Features of Chemical Refining
l         Excellent adaptability and fewer requirements for high oil quality
l         The finished oil is consistent and stable
l         Less bleaching earth necessary compared with physical refining
 
It is widely suitable for small type refining mill,specially for the soy oil refinery.
In this process, the crude veg. oil filtered is added into the acid and NaOH for neutralization and degumming to separate FFA's, phospolipids and other impurities.

 Edible Oil Processing Main Machines