220v 110v 380V frequency inverter 50hz to 60hz 5.5KW

Item

FU9000-F series

Control Method

SPWM

Input Power Supply

400V Power Supply: 340VAC~460VAC

220V Power Supply: 180VAC~250VAC

Frequency Control

Frequency Range

0.1~400.00Hz

Frequency Accuracy

Digital:0.01%(-10~40°C)

Analog:0.1%(25±10°C)

Frequency Setting Resolution

Digital:0.01Hz

Analog:1% of Max Operating Frequency

Output Resolution

0.01Hz

Operator Setting Method

Press← or ∧ or  ∨ to set

Analog Setting Method

0-5V /0-10V

4-20 mA /0-20mA

Other functions

Frequency up/lower limit,start frequency,stopping frequency,three skip frequencies can be individually set

General Control

Acceleration/Deceleration time

0.1-6500s four selectable combinations of independent acceleration and deceleration setting.

V/F Curve

Set V/F curve at will

Torque Control

Max Torque 10.0% Max output voltage,the starting torque can reach 150% at 1.0Hz

Multi-function input terminals

6 multifunction input terminals for 8 multi-speed,easy PLC,4 Accel/Decel time,UP/DOWN command,external emergency stop

ITEM

HCI-A

Communication control

RS485

Operating temperature

-10~40°C

Humidity

0~95% relative humidity

Vibration

0.5G or lower

Protection Function

Instantaneous over current

Approx.200% 1 minute

Over load

Inverter:150% 1 minute

Motor Overload protection

Electronic thermal overload relay

Over voltage

23 series:DC bus over 400 Vdc

43 series:DC bus over 800Vdc

Under voltage

23 series:DC bus voltage drop 200Vdc

43 series:DC bus voltage drop 400Vdc

Momentary power loss

0~2 seconds:The inverter can be restarted by speed search.

Heat sink over heat

Protected by thermistor

Multi-function output termianls

5 multifunction output terminals for the displaying and warning of on-running,zero speed,counting and external fault information.

Other functions

AVR,Decelerating stop or free-stop,DC brake,auto restart tracking,easy PLC auto energy saving,adjustable carrier Frequency(Max 20KHz)

Digital operator monitor

Frequency command,output frequency,speed output current,output voltage,DC bus voltage and rotation direction.