LCD Display 30A PWM Charge Controller /solar Regulator

FOB Price

US$ 35 - 65 / Set

10 Sets(Min. Order)

Port Wuhan/Shanghai/Shenzhen
Payment TermsCredit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Hubei, China	Brand Name	JUTA
Model Number	CM30	Application	Voltage Controller
Rated Voltage	12V	Maximum Current	30A

Product Description

Specifications

solar regulator
1. large LCD screen
2. working time auto set
3. 12V/24V switch

Installation

Install

1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density is less than 4mm² that is conductive to reducing the line voltage drop. Recommended: 30A with 10mm² cable. Check weather the installation sites compliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.

2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.

3. As shown on the right, connect the

(1) Load,

(2) Battery and

(3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.

4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)

5. If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to the host computer.

Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.

Note:Battery polarity will not damage the controller, but you will have a load equipm

Technical Data

Data Model	CM2024Z	CM3024Z	CM2048	CM3048	Data Model	CM3024Z	CM3048
Rated Current	20A	30A	20A	30A	Installation cable area.	≤7# AWG (16mm²)
Rated Voltage	12V/24V		48V		Operating Temperature	-10°C~60°C
Open Circuit Voltage of solar panel	≤50V		≤100V		Storage temperature	-30°C~70°C
Low Voltage Disconnection(LVD)	10.7V/21.4V		42.8V		Humidity requirements	≤90%,no condensation
Float Voltage	13.8V/27.6V		55.2V		Size	90 mm×188 mm×48 mm
Low Voltage Reconnection(LVR)	12.5V/25.0V		50.0V		Mounting hole spacing	60 mm×178 mm --Φ5
No load loss	≤30mA				weight	360g
Loop Voltage Drop	≤170mV				Notes	Model suffix “Z” represent automatic identify system voltage level, “T” represent controller with remote monitoring.
Charging Mode	PWM mode
Temperature Compensation	-4mV/Cell/°C

Contact Us

Wuhan Wanpeng Science & Technology Co., Ltd.: Contact nameJUTA Wang
Chat Now; Phone86-27-83496953; Address2F No16 Block, High technology industry park ZHUANKOU Developing District WUHAN China, Wuhan, Hubei