Energy Saving Biomass Pellet Burner for Drying Equipment

 Biomass pellet burner introduction
Widely application of our biomass /wood/sawdust pellet burner : 
Our biomass pellet burner is as a heating source which special for industry using widely used in steam generator, water boiler, industrial furnace, Burning furnace, Fuse burning furnace, kitchen equipment, dryer machinery, food drying equipment, Pressing equipment, Painting equipment, Highway road building machinery equipment, asphalt heating equipment, pressure die casting machine etc.

Features of the biomass pellet burner
1. Using biomass pellets,farming waste(straw, wheat stalk, corn stalk, cob, rice husk, peanut shell, Cotton branches, weeds etc.),
 forest waste(trees, bark, tree root, leaves, wood shavings, sawdust etc.) etc, as raw material.
2. The biomass pellet size 3-12mm in diameter is the best material size for the  biomass pellets.
3. There is no CO2, SO2 or other harmful gas produced the fuel after burning,this is environment protecting machine.
4. Screw feeding, high temperature increasing oxygen, temperature control.  moisturizing automatic intelligent control system. 
5. Automatic operation, one person is enough to watch over it.
6. Vortex design, multi-cyclone increase oxygen, raw material could be made full use with maximum limit.
7. The heat efficiency can reach up to 95%, temperature can reach to 800-1200 degree.
8. Saving cost of 30-40% than burn the coal directly.

The raw material for wood pellet burner

Biomass wood pellet 

Export record/Custonmer site

America, Canada, Russia, Italy, Brazil, Australia, New Zealand , Uruguay, Bulgaria, Uganda, Philippine, India, Pakistan, Vietnam, Belgium, Indonesia, Nicaragua, Guatemala, Ukraine, Thailand, Malaysia, Nicaragua ect.

Technical parameters

   1) What's the use life of your biomass burner? 
our answer: 10 years if you operate under the instruction and regular operation.
2)What’s the consumption per hour of your burner? 
our  answer: This is comply with the model you choose, details pls check section 5.
3) Which material do you use? 
our answer: New high-temperature composite materials, like refractory bricks, castable material. durable for use. 
4) What’s your combustion principle?
our answer:  Suspension combustion, half fuel half air, burn furthest can up to 95% or more.
 5) How about the ignition system? 
our answer: Automtic system,  diesel & petrol either is ok. 
6) How much time it takes to start the burner?
our answer: About 10-20 minutes. 
7) How much time it takes to install the machine? 
our answer: It's easy for our technicians, it depends on the equipment that you need.  
8) How many sawdust it needs
our answer: Depends on the model you choose, details will send you by email. 
9) How many people it needs to run the burner? 
our answer: Only 1 
10) Can it work continuous? 
our answer: Yes, it can keep working for 24 hours per day
11) Can it be fed automatic? 
our answer: Yes, we have automatic feeding system. 
12) Can it be customizable? 
our answer: Yes, we can produce the burner according to different customer's special requests.