factory direct sales DC DC Boost Converter 12V 24V 35V 48V 55V 58V 60V 68V 70V 75V 80V voltage regulator

Specifications

We produce MODULE ! CUSTOM-MADE module is OK! Our company produce your own board

factory direct sales DC DC Boost Converter 12V 24V 35V 48V 55V 58V 60V 68V 70V 75V 80V voltage regulator

Product features:

Heat radiating design (length 85MM* width 62MM* high 64MM), and black oxide treatment (excellent radiating effect of black oxide). Support 12-60V wide input voltage, 12-80V output voltage adjustable width, low input and output voltage difference.

The new force, 600W converter module, 12-60V wide input voltage, 12-80V output voltage adjustable width, low input and output voltage difference.

The module name: constant current module 600W boost

The modular nature: non isolated step-up module (BOOST)

Input voltage: two input voltage range, (the jumper plate selection)

1, the 8-16V input (for the three string lithium battery and 12V battery application) input in this state, do not pressure input

Otherwise it will burn module!!!

2, the 12-60V input default range (for a wide range of input voltage application)

Input current: 16A (MAX) over 10A please strengthen heat dissipation

The quiescent current: 15mA (12V or 20V, the output voltage is Gao Jing's current will increase)

Output voltage: 12-80V continuously adjustable output (default 19V, such as the need to please the shopkeeper explains other voltage. )

12-80V fixed output (for batch customers)

Output current: 12A MAX more than 10A (and please strengthen heat input, output pressure difference, the output current is small)

Constant current range: 0.1-12A

Output power: *10A = input voltage, such as: input 12V*10A=120W, input 24V*10A=240W,

Input 36V*10A=360W, input 48V*10A=480W, input 60V*10A=600W

If you need more power, you can use two parallel modules, such as the output to 15A, you can use two modules in parallel,

Each module can be transferred to 8A current.

Working temperature: -40~+85 degrees (high temperature environment and please strengthen heat)

Operating frequency: 150KHz

95%: the highest conversion efficiency (efficiency associated with the input, the output voltage, current, pressure difference)

Over current protection: (input is over 17A, automatically reduce the output voltage, a certain range error.)

Short circuit protection: (input fuse 20A) double short circuit protection, the use of more security.

Input reverse connection protection: No, (such as the need to please series diodes in the input)

Output: anti irrigation, for charging does not require the addition of anti reverse diode.

Installation: 2 3mm screws

Connection: connecting terminal welding free output

Module size: length 76mm width 60mm high 56mm

Module single weight: 205 grams

The scope of application:

1, DIY a regulated power supply, 12V can be input, output can be adjustable 12-80V.

2, to supply your electronic equipment, can according to your set the output value of the system voltage.

3, as a vehicle power supply, for your laptop computer, PDA or various digital products supply.

4, a high power DIY notebook mobile power: with large capacity 12V lithium battery, so your books to go where you can light.

5, the solar cell board.

6, to the battery, lithium battery charging.

7, to drive the high power LED lamp.

Operating instructions:

A, the input voltage range selection: the factory default for 12-60V input, when you use 12V batteries or three string, four string lithium battery, can put the jumper wire cap short connection, select the 9-16V input.

Two, the output current control method:

1, adjusting the CV potentiometer, according to your battery or LED, the output voltage is set to the value of the voltage you need. Such as the 10 series LED voltage is 37V, adjust the 55V four series battery.

2, a CC potentiometer counterclockwise around 30 laps, the output current is set to the minimum, LED connected, CC min position to your desired current. For battery charging, the battery discharge, the output is received, the CC adjusted to current needed by you, (for charging time must be used for the discharge cell transfer is allowed, because the battery residual quantity is more, the charging current is small.) Please do not use the short way adjustable current, circuit structure booster module cannot use the short circuit method.

Import 27mm sendust cores, bold copper enameled wire bifilar wound, thickened aluminum radiator, the lower heat input module, the 1000uF/63V electrolytic capacitor, the output of two 470uF/100V low resistance reduction, the lower output ripple. Inductance horizontal design more reliable, a replaceable fuse, double protection more reliable. The whole set is very reasonable, structure design is very elegant.

Shipping terms:

1.Ship to whole world : DHL , UPS, FEDEX, EMS, HKPOST, SGPOST,SWPOST

2.Lead time:2days. If we don't have stock at that time, it takes 2-4days to produce it.

Payment terms

1.We accept PAYPAL, TT, WESTERN UNION, ESCROW

2.Commission:
   *Paypal: total sum *0.041
   *Escrow: total sum *0.05
   *TT: $28-$45(according to amount)
   *Western union: $0

Contact us

SKYPE:aimeehe2011  Cellphone:13760273376