aluminum oxide grinding wheel cutting wheel

Products discription

•  

  weixiang high speed resin grinding wheel

   

  1. High metal removal rate and impact resistance.

   

  2. Less material loss, noise and dust, few sparks.

   

  3. Long-life durability.

   

  4. Low vibration and high stability for comfortable grinding or cutting.

   

  5. Double nets for durability and safety.

   

  6. Made by abrasive and special resin, has high tensile and bending strength. 

The products are widely used for cutting metal and stainless steel, grinding welded joint, deburring the  casting, and repairing defects on metal surface

Factory Advantages:

1.We have the raw materials making plant,so we can control the qaulity and cost effectively .                          

2.Advanced technique and many years of production experience.

3.Convenient traffic.

4.Professional and efficient service.

5.ISO9001certificate.

6.Accept OEM brand,

7.Samples for free.

Packaging for your reference:

Warm Prompt:                                                                                                                                                          

1.Before starting the lathe, please check the protection cover and the switiches for various actions to observe whether they can be adjusted to the place where they should reach and whether they have been fixed well.                                                                  

2.The protection cover should cover at last    half of the wheels.                                                                              

3.After the wheels are installed onto the main axle of the lathe ,they should race for at last 5 minutes.                                                                        

4. The surface on both sides of the grinding wheels can not be used for grinding unless the wheels are made on the purpose.                                                                                                                                                                 5.When in use,it is prohibited to push the workpiece with lever to increase pressure on grinding wheels.                                                                              

6.When processing ro repairing the gringding wheels,penetrate the cutting tool properly.Repair and maintain grinding wheels with special tools.