2014 newest high quality bottle filling machine price(bottle filling capping labeling)

Specifications

Brief Instruction

This unit is developed on the basis of the new design, and it increases some additional function according to the similar products in the market. Filler has been added with an increase of some additional features. It is more simplified and more convenient for the operation, precision adjustment, filling volume adjustment, equipment cleaning, maintenance of the products, etc...

This unit adopts pneumatic components to replace electrical control circuit, so it is quite suitable for the use in the request of anti-explosion environment.

Model selected

The model of the filling machines which made by TENG MENG is according to the maximum filling volume of the customer’s request...25-250ML 50-500ML  100-1000ML  250-2500ML

Work principle

A. Through the cylinder's movement of forward and backward to make the piston which is located in the cylinder do reciprocating movement, so as to occur the negative pressure in the preceding chest of the cylinder.

B. The piston is pulled backward when the cylinder make forward movement, the material cylinder occurred negative pressure, the materials in the barrel are pressed into the feeding pipe by pressure and go into the material pipe through unidirectional valve of feeding and discharging materials.

C. The piston is driven forward when the cylinder make backward movement, the materials are pressed and go into discharging pipe through unidirectional valve of discharging materials, finally filled into the empty bottle which need to be filled, then one time filling finished.

D. It is a single and simple action to each time of filling for the piston filling machine, so it has very high filling precision and stability to every regular container

Check before operation and operation order

All parts of the machine should be checked if they are fine before operation so as to avoid mechanical failure or personal injury accident

Contents of check and operation:

 A. If the preceding handle and back handle are clamping tightly.

B. If the lathe dog is clamped tightly.

C. If the cross clip and filling head are clamping tightly

D. Connected with air pressure source, the air pressure<8kg/cm², machine work pressure: 4 to 5 kg/cm²

E. Turn on the air source switch and confirm the black pipe of filling head’s small cylinder is on the top. (Note: forbid long time working without materials)

Adjustment of filling volume

Adjustment of filling volume is determined by the capacity of the container which the user wants to fill. As the materials are different, the data of the filling volume counter is different. Adjust the filling volume and filling precision to user need by program controlled switch.

Detailed operations are as follows:

A. Adjustment: adjust the adjusting screw of enter pneumatic control switch, turn left or turn right to move the position of adjusting screw, adjust the adjusting screw of exit pneumatic control switch properly, to the satisfied position

   B. Cup or bottle should aim at the filling head, (note: material cylinder must be full otherwise the filling volume is not accurate) please check if filling volume of the cup or bottle is accurate or use electronic scale to weigh if the filling volume is accurate

   C. If there is difference please turn on the handle to move the exit pneumatic control switch, move forward, filling volume decrease; move backward, filling volume increase.

   D. Repeatedly adjust the exit pneumatic control switch until to the filling volume and filling precision which the user need.

.

Warning:

The compressed air must be confirmed turned off.

 It is Forbidden to use the organic solvent to wash machine, such as gasoline, benzene, xylene, bananas water, sodium hypochlorite, etc..

After all the parts are cleaned thoroughly, they are suggested to be installed when they are dry besides there’s no water and impurities in the air compressing pipe and connecting parts.

 Solutions to the Failure

 Applicable scope of filling materials

      water       honey sugar    acid cheese    fruit juice     shower          gear oil        liquid coffee   ink           eye shadow fluid

     tea      shampoo     glue  food/paint     washing hand fluid   cream     milk         liquid soap         butter   syrup         plant oil

our factory

Packaging:

Plywood packging.

Shipping: 

· European Countries: 22-28 days

· The United States: East --13-16 days, West--21-28 days

· Brazil: 30-40 days 

· Russia: 36 days

· Asia Countries: 3-5days

♥ To get more new information of the machines or others pls advise and we can specially send some details for you.We would offer any groups of machines you would like to develop.

♥ To know more about us or get latest quotation pls do not hesitate to contact me.

I will reply you soon!

I hope we can establish good relationship!