6 CBM vacuum drying set wood lumber dryer kiln china equipment

==characteristics and advantages:

2.1 Vacuum: vacuum state the boiling point of water is low, high frequency drying equipment in water is heated to 60 degrees Celsius began vaporization, reached the purpose of drying under low temperature condition, greatly reduces the wood crack deformation problems, especially suitable for temperature sensitive more valuable timber drying. While a vacuum negative-pressure effect but also to accelerate the drying process.
2.2 Other high frequency vacuum sterilization insecticidal environmental protection and many other features, not one one repeat.
2.3 Fast: heating process without heat conduction, and out of the wood will be heated at the same time;
2.4 Quick dehydration: a heating process, wood formed at high low temperature gradient ( with conventional heating, the 4 opposite ) gradient will accelerate the wood moisture rapidly to the wood surface movement;
2.5 Good quality: the drying process by controlling the heating rate, relative to the vacuum degree, and condensation speed to effectively control the wood moisture content gradient and surface moisture, effectively solve the crack, crack, wood end table bifida and discoloration;
2.6 Strong adaptability: high frequency vacuum drying can realize low temperature drying, but also can realize the high temperature drying, eliminate stress, curing the resin ( broken wood ), can adapt to almost all species of wood drying;
2.7 Low drying cost;
2.8 Without environmental pollution;
2.9 Unmanned automatic drying

Packing & shipment

1.Plastic and foam packing, fixed by wood pallet, it is packed in 40 feet container.

2.by sea transport