LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine

Specifications

LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine   

Specifications of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine

1.Power: 500W

2.Voltage: 220V and 110V are available 

3.Dimension: 550*350*280mm

4.NW: 19KG

5.GW: 22KG

6.Packing: carton size: 630*460*380mm 

Features of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine    

1.Auto heating metal plate,maximum temperature is 400 centigrade.

2.Power supply AC 85V to AC 265V 50Hz ,almost for users from all over the world.

3.Product size range: 3.5-5.5 inch (according to different replaceable clamp product).

4.Electrical control system:uses the PLC as the central processor, execute component 

adopts imported electrical components as the main control components such as: 

temperature control table, thermocouple.

5.With motor drive, speed and temperature are adjustable, quite convenient, high efficiency,

and easy operation.

6.No noise, economical and practical, greatly reduce the production cost.

7.Safety power system inside, avoiding the electric leakage problem.

8.Anti static body material,prevent the LCD and the flex cable being damaged from the static.

9.Easy installation

10.Smooth metal plate to hold the touch screen without any damaged.

11.Temperature should be set to 80 centigrade to 100 centigrade,when you do the job 

on iphone and galaxy series etc.

12.Compatible for LCD or LED screen assembly

13.15cm last long the life of the wire you use to separate, and prevent your hands be hurt by 

the high temperature platform.

Material of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine

More Photos of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine    

Operating Instruction of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine    

1.Turn the power switch on.

2.Turn the temperature controller on, and set the temperature between 60 and 80 degree.

3.Wind wire on the rollers.

4.Fix the wire on the roller of the left side motor. Wind the wire from top to bottom, then

adjust the steering button to up position. Go on winding wire bypass the front two rollers. 

Then turn on the rotary switch. Wind the wire about 3-5m, turn off the rotary switch.

5.Pull the wire tight, and wind the wire from bottom to top, then fix the other end on the roller

of the right side motor. Adjust the steering button down. After the wire rotary half on the wheel,

turn off the rotary switch. Finally, adjust the steering button to horizontal position.

6.Adjust the motor from the top of the skidway about 2 cm.

7.Put the LCD on the operating floor.

8.Adjustment the wire and heating stage on the horizon, then turn the automatic mode on.

Adjust the proper speed, keep the wire and screen certain radian. Slowly push heating stage by 

hand.

9.When reach the end of the LCD assembly, quickly push the heating stage back and forth 2 

times. After finishing the separation, just separated the lcd and touch panel by hand.

10.Adjust the rotary switch to the low position, and trun off other buttons, finally trun off the 

power switch.

11.Note: Adjust the steering button up, the machine will run clockwise; Adjust the steering 

button down, the machine will run anticlockwise; horizontal position will not run.

Note:

1. Do not produce the heat more than 110 degree when operating; otherwise the high 

temperature may destroy the phone accessories

2. As different country has different current or voltage standard, we have Voltage 220V and 

110V for your choice; please choose the right one which meets your country's voltage standard

Certifications of LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine

Our Company

Why Choose Us

1.We are the professional manufacturer. And have been in this filed for more than 5 years. Engaged in Design, Development, Production and Selling.

2.Our machine (LCD & Touch Screen Separate Machine DH-CP2 Aluminum Separation Machine) is best in quality with low price. Are popular with the repair shop and training school all over the world. Welcome you to be our agent.

3.Fast delivery: FedEx, DHL, UPS, TNT and EMS. Many models in stock all the time.

4.Payment: Western Union, PayPal, T/T.

5.OEM and ODM is welcome.

Thank you for your attention. Should you have any request and question, please feel free

to contact us. Your inquiry will get our fast reply. Welcome you to visit our factory.

We always answer your questions: 24 hours a day, 7 days a week.