Portable Fingertip Pulse Oximeter machine oxygen monitor

Instructions

Principle of the 50QA Pulse Oximeter is as follows:

Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.

The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports

(It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc

Major Features
Integrated with SpO2 probe and processing display module
Small in volume, light in weight and convenient in carrying
Operation of the product is simple ,low power consumption
SpO2 value display
Pulse rate value display, bar graph display
A pulse rate sound indication
With measured data overruns limits and low-voltage alarm function
Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage, and with alarm function
Automatically power off function: when the device is under the state of measuring interface. it will automatically power off within 5 seconds if the finger falls out of probe.
Small appearance, more fit for children
Main performance
Display Mode: Segment LCD display
SpO2 Measuring Range:0%~100%, (the resolution is 1%).
Accuracy:70%~100%:±2% ,Below 70% unspecified.
PR Measuring Range:30bpm~250bpm, (the resolution is 1bpm)
Accuracy:±2bpm or ±2% (select larger)
Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumption:less than 70mA
Voltage:DC 3.6V~4.2V
Power Supply:Voltage 3.6 rechargeable lithium battery × 1
Battery working hour:The theoretical number is 10 hours
Battery working life:Charge and discharge no less than 300 times.
Safety Type:Interior Battery, BF Type

1. Where is your factory located? How can I visit?
Our factory is located in Shenzhen City, Guangdong Province. Welcome to visit us!

2. Can you do OEM?
Yes. We can make your brand and design. and also can make the packing as per your request.

3. And Logo printed?
We can print your logo in the products as you required.

4. How does your factory do regarding quality control?
1) All raw material we used are environmental-friendly.
2) Skilful workers care every details in handling the producing and packing process.
3) Quality Control Department is specially responsible for quality checking in each process.